kurtjohnson10
Well-Known Member
Start worrying by the look of them 
Turboman
Mab An Gov
What do the piston crowns look like?
Hiya, been hearing a weird clanking coming from the old coal burner up front so a taken the top of the engine off and the valve pokers look like this? is this something to worry about or is it normal?
Zed.
Well-Known Member
normal after a quick / 'ghetto' broken-cambelt repair (usually bends the pushrods as your photo)
normal people remove the pushrods & hammer straight before reusing...
posh people buy new
Rich.
kurtjohnson10
Well-Known Member
kurtjohnson10
Well-Known Member
you have such a way with words -normal after a quick / 'ghetto' broken-cambelt repair (usually bends the pushrods as your photo)
normal people remove the pushrods & hammer straight before reusing...
posh people buy new
Rich.
Zed.
Well-Known Member
better using a scraper / blade as emery scratches and 'sheds' abrasive particles that can go through the oil system to the oilfilter
Rich,
Sebrof
Member
Wait, you replace yours before they snap??!reminds me, must replace the cambelt on the Ninety as I've just fitted a 'used' 200 engine
Rich.
Zed.
Well-Known Member
reminds me, must replace the cambelt on the Ninety as I've just fitted a 'used' 200 engine
Rich.
Cross your fingers them 3 silly waterway bolts come undone!
