jolly-109

Active Member

• Mar 19, 2017

• #1

One of the supports that runs across my 110 has completely rotten away and fallen off, will this fail an MOT for this and is it possible to repair / add them back in?
The only parts left is a small amount that is attached t the chassis, this is one at the back.
Sorry about picture hard to get one that means anything

 

Oldseadog

Well-Known Member

• Mar 19, 2017

• #2

Cross members are an integral part of the chassis.
They can be welded up, but you might be better off fitting a new one.

 

jolly-109

Active Member

• Mar 19, 2017

• #3

There is nothing left to weld, looks more like a floor support rather than cross member? Would a cross member be made of such thin folded steel?

 

neilly

Well-Known Member

• Mar 19, 2017

• #4

Is this number 9 in the link?

http://www.allbrit.de/UNI.cfm?PAGE=764053&SPRACHE=EN

Cheers

 

Gmacz

Well-Known Member

• Mar 19, 2017

• #5

Paddocks have the floor supports, rivet or bolt it on. Just fitted 3 to the 90, 110 has 4 i think. Not an mot failure and easily fitted so just fit a new one. Is this what it looked like -

 

Last edited: Mar 19, 2017

neilly

Well-Known Member

• Mar 19, 2017

• #6

YRM make parts for the rear floors.
May be worth giving them a call and asking if they make that one.

Cheers

 

tottot

Well-Known Member

• Mar 19, 2017

• #7

As above floor support,not an MOT fail.

 

Ian Maycock

Well-Known Member

• Mar 19, 2017

• #8

YRM do all the bits I've fitted one of there complete floor kits to my project 110 they're very good, they're bonded and riveted to the floor only point as to an mot failure is if its a station wagon the 2nd row middle seat belt bolts through the floor and through one of the floor bracings.
cheers Ian

 

The Mad Hat Man

Well-Known Member

LZIR Despatch Agent

• Mar 19, 2017

• #9

they will also consider doing new panels if you can supply a master

 

jolly-109

Active Member

• Mar 19, 2017

• #10

Gmacz said:

Paddocks have the floor supports, rivet or bolt it on. Just fitted 3 to the 90, 110 has 4 i think. Not an mot failure and easily fitted so just fit a new one. Is this what it looked like -

Click to expand...

Yes it looked like that!
Thanks for the help

 

jolly-109

Active Member

• Mar 19, 2017

• #11

Gmacz said:

Paddocks have the floor supports, rivet or bolt it on. Just fitted 3 to the 90, 110 has 4 i think. Not an mot failure and easily fitted so just fit a new one. Is this what it looked like -

Click to expand...

Do you know the part number?

 

Gmacz

Well-Known Member

• Mar 19, 2017

• #12

http://www.paddockspares.com/afc710010-rear-body-crossmember-3-for-swb-6-for-lwb.html

 

Oldseadog

Well-Known Member

• Mar 20, 2017

• #13

So it's not a full crossmember as I had been led to believe!
Sorry about giving the wrong info!!

 

jolly-109

Active Member

• Mar 20, 2017

• #14

Oldseadog said:

So it's not a full crossmember as I had been led to believe!
Sorry about giving the wrong info!!

Click to expand...

No problem thanks for the input.

 

jolly-109

Active Member

• Mar 20, 2017

• #15

Gmacz said:

http://www.paddockspares.com/afc710010-rear-body-crossmember-3-for-swb-6-for-lwb.html

Click to expand...

Thanks very much for all your help

 

tetsu0san

Active Member

• Mar 22, 2017

• #16

I've just had to replace all the ones on mine. I had to do the rear crossmember at the same time so I just removed the rear tub, turned it upside down and did it that way.

I picked mine up second hand from Newbury 4x4 spares day last year. And it's on again this weekend...