Have you had a good look between the valves, both my current in use and spare 200 heads are cracked there, not causing a problem as of yet, so just surface cracks
 
Last edited:
Have you had a good look between the valves, both my current in use and spare 200 heads are cracked there, not causing a problem as of yet, so just surface cracks

would a crack between valves cause water loss and steam out the exhaust pipe?
 
I had a cracked head on my 2.5D NA. It was cracked between the exhaust and inlet ports. Coolant was pressurised and I had constant steam out of the exhaust (lots of it).
 
I had a cracked head on my 2.5D NA. It was cracked between the exhaust and inlet ports. Coolant was pressurised and I had constant steam out of the exhaust (lots of it).
cheers spook.
so ive ordered a new gasket kit and i have a spare head thats been skimmed and p checked so that will be going on this weekend! Oh the joys
 

Similar threads