jak1471
New Member
Hi all.
I was driving back from work earlier in my TD5 as a pipe had burst and the family couldn't find the stop valve so I put my foot down to get back. My heater wouldn't turn on and as I pulled up the engine light came on, so I switched it off and tried to restart. And it won't start. Lifted the bonnet and water has sprayed from the coolant bleed screw. And the hose was hard. Took the cap off the filler bottle and loads of steam ****ed out. Checked the engine loom for oil and that was fine..... Do I need to start looking for a new head?
I was driving back from work earlier in my TD5 as a pipe had burst and the family couldn't find the stop valve so I put my foot down to get back. My heater wouldn't turn on and as I pulled up the engine light came on, so I switched it off and tried to restart. And it won't start. Lifted the bonnet and water has sprayed from the coolant bleed screw. And the hose was hard. Took the cap off the filler bottle and loads of steam ****ed out. Checked the engine loom for oil and that was fine..... Do I need to start looking for a new head?