K

kevy

New Member

• Jan 20, 2011

• #1

can someone tell me,when replacing a td4 turbo you have to take out thefront subframe then the ird unit just to get to the turbo, and i remove the intercooler today and was what is the best way of flushing the oil out

 

B

booboodag

Active Member

• Jan 20, 2011

• #2

It is easier to remove the front crossmember and ird to get the turbo out.
You need to steam clean the intercooler and if the turbo has failed then take all the pipe work out and steam clean them as well. If there are any particals left in the pipe work then it could cause the new turbo to fail.

 

K

kevy

New Member

• Jan 20, 2011

• #3

can you explain a bit more about the crossmember

 

B

booboodag

Active Member

• Jan 20, 2011

• #4

LR call it the rear beam, its the what I think you have called front sub frame. If you down load the rave disk then it will give you all the info you need.

This is the link for it land rover rave technical system

 

Last edited: Jan 20, 2011

jamesmartin

Well-Known Member

• Jan 20, 2011

• #5

just undo rear sub frame bolts it should drop down enough

 

A

AL585V

New Member

• Jan 21, 2011

• #6

any one with info on where to get an IRD for my freelander? - at a reasonable price of course!