Jonmlb748

Well-Known Member

• Jul 11, 2019

• #1

 

Flossie

Well-Known Member

• Jul 11, 2019

• #2

There's a large O ring under the pumps distributer head.
On the join about an inch to the right of the bolt you have circled.
I believe it's possible to do in situ if you are careful and do not remove all the bolts at the same time that hold the distributer head on.
I would clean it up spotless first though just incase it's leaking somewhere else and just ending up where you're circled.

 

Jonmlb748

Well-Known Member

• Jul 12, 2019

• #3

Thanks that would seem to be it.

 

Blackburn

Well-Known Member

• Jul 13, 2019

• #4

Have a look here https://www.headseal.com/
Think I have also seen a youtube video for the same job.

 

Jonmlb748

Well-Known Member

• Jul 20, 2019

• #5

I think I will change the pump as I have a spare, only problem is I don’t have the pump locking tool but have made this ,any constructive criticism why it will or won’t work?

 

Flossie

Well-Known Member

• Jul 20, 2019

• #6

Made what?