First Time Long Time! I currently own a 03 Disco; named Disco 6. I've lived in all the 'O' states and currently live in Oklahoma (name the other 2). I am a retired military vet of 32 years. I work as a Historian for the organization I retired from. I recently did an LS swap on Disco 6. She is running a 5.3L L33 aluminum block Silverado. Just been doing some upgrades on Disco 6. She currently has a 2" lift. I recently upgraded to Tom Woods drive shafts after I lost one to wear and tear. Just completed an oil change, tranny service, and replaced my steering gearbox. I will be replacing wheel hubs and upgrading to HD axles. I just renewed the roll bar bushings and installed new roll bar links with disconnects on the front. Going to install +3" shocks and a 1" spacer on the springs as well as cranked watts linkage. Anyway, I've been rovering since 2004, I've owned a 95 D1 and an 01 D2. However, this 03 is my "die on the sword" vehicle. I learn alot from from forums and everyone's experiences, lessons learned, and advice.

From one U.S. vet with a Disco 2 to another, welcome to the forum mate.

Welcome dam fine looking landy

Welcome to landyzone regular users of retirement home. Veterans always get a free pint of finest advice here. I salute you sir for your service.

Parade will be at 010:34am for inspection of Landrovers by our benevolent leader. Don't forget polish the steering wheel.

Hello and welcome

Hi and welcome!

Nice looking disco too.

Hi and welcome

rwmathews said:

First Time Long Time! I currently own a 03 Disco; named Disco 6. I've lived in all the 'O' states and currently live in Oklahoma (name the other 2). I am a retired military vet of 32 years. I work as a Historian for the organization I retired from. I recently did an LS swap on Disco 6. She is running a 5.3L L33 aluminum block Silverado. Just been doing some upgrades on Disco 6. She currently has a 2" lift. I recently upgraded to Tom Woods drive shafts after I lost one to wear and tear. Just completed an oil change, tranny service, and replaced my steering gearbox. I will be replacing wheel hubs and upgrading to HD axles. I just renewed the roll bar bushings and installed new roll bar links with disconnects on the front. Going to install +3" shocks and a 1" spacer on the springs as well as cranked watts linkage. Anyway, I've been rovering since 2004, I've owned a 95 D1 and an 01 D2. However, this 03 is my "die on the sword" vehicle. I learn alot from from forums and everyone's experiences, lessons learned, and advice.

View attachment 307284

Click to expand...

Welcome looks good.

Omaha and Oregon?
Nice Landy!