Hello all.

And Thanks.

After owning my FL for only few days it was apparent that there was a problem with the car. There was a droning sound and some vibration at@ 60mph. As you do, you go on the tinternet. lucky for me! I found this site. Thanks for all your advice as it has saved me a few bob.

ANYHEW. I dropped the prop shaft and run the car in two wheel drive mode and the noise and vibration had gone. After looking over the prop shaft it had to be the VC unit. So, with a phone call to Bell Engineering a order was placed and i drove down to pick up my re con unit. To cut a long story short Bell Engineering were a great help, with help and advice. Far better than the over the counter' ere's ya unit mate' and goodbye. I think I've got this problem hopefully solved as a quick nip down the motorway gave no problem at all.

Thanks again to you all and Bell Eng

Cheers

10 points again to Austen

He can have a cookie.

joe27979 said:

10 points again to Austen

Click to expand...

Sorry, i can't seem to get the gist of your replies. Go on enlighten me

Austen owns bell engineering. Also posts on ere.

Hippo said:

Austen owns bell engineering. Also posts on ere.

Click to expand...

Austen.
It's as quiet as a mouse at all speeds and made it up the worst of tasks on the sunday for the day... As we spoke about.

Many Thanks indeed.

How easy is it to change the vcu - on ramps on the driveway?

I'm getting a rattle when on tight 45 degree turns and potentially slow uptake in 3rd and 4th gears.