Disco v8 bolton
New Member
hi I am Kieran from Bolton I had a discovery v8 for a few months now n just joined the forum hi every 1
blue beasty
Leaks an prone to bits dropping off
Welcome to loonyzone. Is it the genuine factory production V7 1/2 or by some fluke run properly? 
Turboman
Mab An Gov
Disco v8 bolton
New Member
Thanks pal n yeah always wanted 1 since I was young
Disco v8 bolton
New Member
Thanks pal
Disco v8 bolton
New Member
It's runs properly I just got problem with props cos it's got a lift kit on n would u buy the wide angle prop shaftsWelcome to loonyzone. Is it the genuine factory production V7 1/2 or by some fluke run properly?
blue beasty
Leaks an prone to bits dropping off
No sorry, I'm a bit skint so you'll have to buy yer own stuff
see what I mean
Disco v8 bolton
New Member
Would u suggest fitting wide angle probshaft or standard 1sNo sorry, I'm a bit skint so you'll have to buy yer own stuff
blue beasty
Leaks an prone to bits dropping off
Depends....How high is your lift? Are you eating u/j's?
Using the search facility will throw up lots of opinions that might help. If not post a fred in the Disco section.
Disco v8 bolton
New Member
It's got a 4 inch lift kit on n I snapped the front prob n it's ripped the rubber doughnut now on the back 1 any ideas y n suggestions how to stop it doin it again thanks pal
blue beasty
Leaks an prone to bits dropping off
I've gotta Series on cart springs and a fat saggy @rse so I'm prolly not the one to ask
Have a search and a read up, if the lift is all suspension rather than body lift you might need to look at double cardon but they don't come cheap and I'm no expert.
Start a thread and you'll get opinions from those with direct experience.
You'll probably want to have a look at getting rid of the doughnut anorl
Disco v8 bolton
New Member
Thanks pal
Gazbo
Well-Known Member
Welcome to the house of fun!
