Hi has anybody else done an interior update on a P38A 1995 ?

I have just fitted a 7 bar seat set from a 2000 model year to my 1995 P38 I had to swap the seat belts as they are a different size on the newer model with
pretension's and don't fit, everything else fitted like a glove, all electrics worked just as they should on the passenger seat ! but then after fitting the drivers seat I find they have changed some of the cabling and not all the multiplugs fit, the main plug is the culprit, thank goodness the seat is in a position which is comfortable to drive but I want to get it sorted ! anyone else had this problem or are you a good auto electrician please drop me a line

I recon you have 3 options...
1. Run fused, 12v feed direct to seats, bypassing memory and complicated stuff..
2. Study circuit diagrams off rave, for both looms and chop it together...
3. Rip it out and find pre 98 seats...I can swop you a set (if yours are beige with black piping)

Good luck.