gavinswadel
New Member
Great post, I've nearly completed my 90 but still have to do the big back panel, did you have to use a heat gun at all to shape round the alpine window cut outs ?
-Defender110-
Well-Known Member
did mine the other day too, massive improvement!!
-Defender110-
Well-Known Member
wide angle lens 
wide angle lens
you mean wide angle arse sat on it
gavinswadel
New Member
Worked a treat after a lot of swearing, once glued it was a bugger to manipulate, did make the mistake of using the genuine lining that came off as a template, much thinner than the veltrim so when it came to folding things were a bit tight ! also had to lengthen a couple of the fir tree fixings to get a grip on the double thickness at the overlap between the front and rear sections. Soldering iron worked a treat for making the holes, nice tidy sealed hole, fixings did not catch on the carpet. Got the back light wired up too. Fitted a couple of Puma speaker pods in the rear (needed a bit of trimming) and finished off with TD5 window surrounds.
