flex001 Member Jan 31, 2017 #1 Hi I have water coming in through the interior light do they just pull out or is it more difficult than that.
Hi I have water coming in through the interior light do they just pull out or is it more difficult than that.
neilly Well-Known Member Jan 31, 2017 #2 Is that the vehicle in your Avatar? As it is difficult to give you an answer without knowing which motor you are asking about......... Cheers
Is that the vehicle in your Avatar? As it is difficult to give you an answer without knowing which motor you are asking about......... Cheers
flex001 Member Jan 31, 2017 #4 neilly said: Is that the vehicle in your Avatar? yes mate. As it is difficult to give you an answer without knowing which motor you are asking about......... Cheers Click to expand...
neilly said: Is that the vehicle in your Avatar? yes mate. As it is difficult to give you an answer without knowing which motor you are asking about......... Cheers Click to expand...
freelance Well-Known Member Jan 31, 2017 #5 Prise out with a screwdriver at one end, helps if it's not freezing hard at the time, makes the plastic lug more flexible!
Prise out with a screwdriver at one end, helps if it's not freezing hard at the time, makes the plastic lug more flexible!
flex001 Member Jan 31, 2017 #6 Ok mate thank you for your advice .I'll put some silicone under the airel....
flex001 Member Feb 11, 2017 #8 Also new cat fitted yesterday so all nice and quiet no more noisy blowing and more pulling power..so all good ....
Also new cat fitted yesterday so all nice and quiet no more noisy blowing and more pulling power..so all good ....