bustersbus
Well-Known Member
If it's the same as any other inter cooler, take it out and give it a guid sloshin' about
Last edited:
Shifty1962
Well-Known Member
Not sure about the 300tdi but on the TD5 the intercooler has to come out with the radiator as they cant be separated in situ.
TattiesanGravey
New Member
I have a 300 tdi and just flushed the intercooler with brake clutch cleaner in situ with the pump sprayer from unipart seems to have worked a treat wouldnt say it was cleened out perfectly but well enough to notice a difference
Yes they can i removed my std cooler and fitted a large bugger without removing the rad, bloody tight though, its just im lazy
Lynall
Shifty1962
Well-Known Member
How long did it take you? What did you have to undo or move out of the way to get it out?
Er to be honest i cant remember but id fitted the large intercooler without opening the cooling system.
Then when i was going to sell the car i removed the large cooler and fitted the std one.
From memory i think i removed the viscous fan and shroud then i think i dropped the cooler in from the top, but this was 3 or 4 years ago.
I bet if you ask any of the cooler makers they know the quick ways to fit them.
Lynall
Lynall
Then when i was going to sell the car i removed the large cooler and fitted the std one.
From memory i think i removed the viscous fan and shroud then i think i dropped the cooler in from the top, but this was 3 or 4 years ago.
I bet if you ask any of the cooler makers they know the quick ways to fit them.
Lynall
Lynall
