LeadFarmer

Well-Known Member

• Jun 24, 2010

• #1

Im wanting a set of inspection ramps for doing oil changes etc. Which models are best for Defender 110s?

Found these so far...

Car Ramps CRW25 - Machine Mart

Landrover Dash Console from Raptor Engineering | Dashboard Accessories | Landrover Accessories

http://shop.difflock.com/heavy-duty-extra-wide-vehicle-ramps-p-100.html

I see the Difflock ramps are for use up to 2000kg. I think my 110 is 3000kg, but most of that weight must be at the front (engine). Is a 2000kg rating sufficient?

Any recommendations please?

 

Last edited: Jun 24, 2010

S

ssmn1234

Active Member

• Jun 24, 2010

• #2

very wise to have vehicle level when doing oil changes.

 

LeadFarmer

Well-Known Member

• Jun 24, 2010

• #3

Point taken but would be good for accessing the filter, and other jobs.

 

S

steve bain

New Member

• Jun 24, 2010

• #4

i bought some cheap ones off ebay for £3 from some local guy. the landy is 3T in total. the weight of just the front or back is considerably less. in fact mine are the same a the machine mart ones and there fine.

 

S

steve bain

New Member

• Jun 24, 2010

• #5

and i have 12.5inch wide tyres.

 

Trewey

Cockernee, Pasty munchin bastid.

• Jun 24, 2010

• #6

Railway sleepers.

 

LeadFarmer

Well-Known Member

• Jun 24, 2010

• #7

steve bain said:

i bought some cheap ones off ebay for £3 from some local guy. the landy is 3T in total. the weight of just the front or back is considerably less. in fact mine are the same a the machine mart ones and there fine.

Click to expand...

That brings the cost down a little, the Raptor Engineering ramps cost a fortune!

Treworgey 90 said:

Railway sleepers.

Click to expand...

You mean those folk who sleep at railways? Sounds like an idea

 

wiltshire landyman

I’m back

• Jun 24, 2010

• #8

i just got a halfrauds low level trolley ya lie on piece o ****s to do oil change,done one last sunday and its easy to slide out from under the landy when the mrs brings ya a cup of coffee

 

LeadFarmer

Well-Known Member

• Jun 24, 2010

• #9

Nice idea, but I was thinking of making the coffee whilst the missus does the oil change

 

Boris113

Well-Known Member

• Jun 25, 2010

• #10

LeadFarmer said:

Nice idea, but I was thinking of making the coffee whilst the missus does the oil change

Click to expand...

Why not get her to do both?! Try your local agricultural suppliers, they will have something thats plenty strong/tall enough. If you have some metal around and trust your welding you could make some?
Harry

 

Spyderman

New Member

• Jun 26, 2010

• #11

LeadFarmer said:

Im wanting a set of inspection ramps for doing oil changes etc. Which models are best for Defender 110s?

Found these so far...

Car Ramps CRW25 - Machine Mart

Landrover Dash Console from Raptor Engineering | Dashboard Accessories | Landrover Accessories

4x4 Store

I see the Difflock ramps are for use up to 2000kg. I think my 110 is 3000kg, but most of that weight must be at the front (engine). Is a 2000kg rating sufficient?

Any recommendations please?

Click to expand...

I bought 4 from Halfrauds, but have hardly ever used them. 2000kg is fine, because that's only about 750kg per wheel load if your 110 weighs 3000kg.

I can do oil changes on mine without the need to jack it up at all, comes from having 36" tyres, but if I do I'd rather put it on axle stands, can almost walk under it them.