bdd · Apr 9, 2011

Tried searching the forums but couldn't find any specific posts on this - I want to remove and clean the inlet manifold. Is this relatively straightforward and quick to remove?

I've replaced the crankcase breather and have fitted an EGR bypass, just want to complete the picture.

Thanks.

angeloc · Apr 9, 2011

Easy - just unbolt it but watch you don't lose any of the orange gaskets that make the seals

mick 1986 · Apr 9, 2011

angeloc said:
Easy - just unbold it but watch you don't lose any of the orange gaskets that make the seals

Yeah it is easy to remove, but there's a few other bits to remove first.
I found mine a pain in the arse to clean, I suppose an overnight soak in brake cleaner, followed by a good vlast with a jet wash should do the trick?

angeloc · Apr 9, 2011

I wonder what the purpose of cleaning it is - I can see improved air flow bit it's not that critical and won't it clean itself eventually?

mick 1986 · Apr 9, 2011

angeloc said:
I wonder what the purpose of cleaning it is - I can see improved air flow bit it's not that critical and won't it clean itself eventually?

If you haven't taken yours off, I would. Then you can see just how much **** is in there mate. I had about 3-4mm of **** on every wall inside. That's a massive restriction of air flow.

angeloc · Apr 9, 2011

mick 1986 said:
If you haven't taken yours off, I would. Then you can see just how much **** is in there mate. I had about 3-4mm of **** on every wall inside. That's a massive restriction of air flow.

Yeh I have taken it off and fitted both the BMW crankcase breather and an EGR bypass - the inlet was oily but I wouldn't say caked with stuff - ah well may as well do it I suppose.

ming · Apr 9, 2011

bdd said:
Tried searching the forums but couldn't find any specific posts on this - I want to remove and clean the inlet manifold. Is this relatively straightforward and quick to remove?

I've replaced the crankcase breather and have fitted an EGR bypass, just want to complete the picture.

Thanks.

This mite help http://www.landyzone.co.uk/lz/f9/egr-blanking-mod-63948.html

bdd · Apr 9, 2011

Thanks folks. Quite easy to remove, but a pain the arse to clean. 4 cans of Mr Muscle oven cleaner later and I think the jobs a good un. Bottle brush helps.

bdd

New Member

angeloc

Well-Known Member

mick 1986

Well-Known Member

angeloc

Well-Known Member

mick 1986

Well-Known Member

angeloc

Well-Known Member

ming

SPACE TWOT

bdd

New Member

Similar threads