Hard Drive

Active Member

• Apr 16, 2020

• #1

Hi. Might anyone know if it's possible to buy replacement rubber seals (orange coloured) for my Injector Loom? See the photo for details.

I'm now missing one and there's a chance the rest will be as perished.
Thanks.

 

andyfreelandy

Well-Known Member

• Apr 16, 2020

• #2

There was a thread a few weeks back with links to replacement plugs. If they come off that could be a source.

I'll have a search.

 

andyfreelandy

Well-Known Member

• Apr 16, 2020

• #3

https://www.vehiclewiringproducts.co.uk/p-619-superseal-weatherproof-connectors

 

Hard Drive

Active Member

• Apr 16, 2020

• #4

andyfreelandy said:

There was a thread a few weeks back with links to replacement plugs. If they come off that could be a source.

I'll have a search.

Click to expand...

Thanks Andy. Also, did you remove the high-press pump's access cover?

andyfreelandy said:

https://www.vehiclewiringproducts.co.uk/p-619-superseal-weatherproof-connectors

Click to expand...

 

andyfreelandy

Well-Known Member

• Apr 16, 2020

• #5

Not up to at the mo. Will take timing cover off when I feel a bit more active and hold it robustly to work on the plug.

 

Hard Drive

Active Member

• Apr 16, 2020

• #6

An update to my need for the Injector Harness Plug seals.
To begin with, I made a huge error. I cleaned the contacts with Carb&Choke Cleaner. That basically ruined the rubber seals - I think.
Secondly, having cleaned with Contact-Cleaner, I found a rubber seal that does the job.
See this picture...

It's a good air/water-tight seal, which is just what I needed. Inexpensive and easily fitted with an engineers-point screwdriver.
It is :- id 13 x 1.5mm . od 16 x 1.5mm
I have a box of seals and it was a case of trial-and-error.
It's fixed. The plugs themselves are okay, it was just the soft orange seals that were affected.
My thanks goes to 'andyfreelandy' who gave me good advice.
This seal information might be of use to you or others, so take it on-board.

 

J

Jayridium

Well-Known Member

• Apr 17, 2020

• #7

Good info, thanks for sharing it