Hi All
Recently played about with my earths, as various lights were playing up/flashing including the opposite direction dash light, albeit dimly, and now that I've cleaned/sorted all those out, everything works fine other than they flash quickly like when a bulb has gone.
The only other thing I have done whilst sorting earths, was to remove/disconnect my 12s second towing socket, and disconnected the cables from the relay which had about 10 contacts. The cables are just loose now but properly insulated. I think it may be something to do with this, but cant see the terminals on the box clearly as old to try putting them back. I should have done one thing at a time.
Am I right in thinking the flasher flashes quickly because its getting too much power, and how could this be now.
Appreciate any suggestions before ripping wiring loom at rear to bits.
Thanks
Recently played about with my earths, as various lights were playing up/flashing including the opposite direction dash light, albeit dimly, and now that I've cleaned/sorted all those out, everything works fine other than they flash quickly like when a bulb has gone.
The only other thing I have done whilst sorting earths, was to remove/disconnect my 12s second towing socket, and disconnected the cables from the relay which had about 10 contacts. The cables are just loose now but properly insulated. I think it may be something to do with this, but cant see the terminals on the box clearly as old to try putting them back. I should have done one thing at a time.
Am I right in thinking the flasher flashes quickly because its getting too much power, and how could this be now.
Appreciate any suggestions before ripping wiring loom at rear to bits.
Thanks