Any ideas on this one? When I turn right dash indicator lights show up nicely. When I turn left there’s just a faint glow. When I put hazards on there’s nothing. All indicators are working normally except the right one mounted on the wing. I’m assuming that may be the problem but can’t fathom out why this would affect the dash light not showing when the hazard lights are on.

Power being lost through shorting likely. Check out that dicky lamp and its wiring.

This has been driving me nuts all day. I’ve replaced faulty bulb & renewed all earths associated with that light and I also noticed a side light out so renewed those earth connections as well. I now have following issue:
All lights work
No indicators work at all using switch on steering column & I’m getting fuel light on permanently.
If I turn hazards on all the indicators work & flash normally.

To me this suggests neither the flasher relay or hazard switch is faulty but possibly the steering column switch ? It can’t be an earth at the indicator bulbs as they all work when hazard switch turned on. The horn works as does the full beam which are both on the same steering column mounted switch. Am I correct in saying the hazards go through the same flasher relay or is it a different relay?

Any one got any ideas as to what the issue may be?

Hazard fed by battery feed and removes ignition feed but links all four indicator lamps ,normal indicator ignition feed and controlled by indicator stalk sound like the indicator stalk