C

clivejukes

New Member

• Jul 14, 2012

• #1

Hi Guys
Ive recently brought an S reg freelander its been in the main dealer service station my problem is when i go to indicate left or right it cuts the main electrics all the main dealer said it was the earthing cables had corroded they changed them and said it works fine, driving today it cut out two times sometimes you can go a week before it happens any ideas as its getting a joke.

cheers:search:

 

Last edited: Jul 15, 2012

R

Richard Martin

Well-Known Member

• Jul 14, 2012

• #2

:doh:
There's only one answer in this section....burn it...if you want any other answers I suggest you post again in the Freelander section

 

thought it was mine!

New Member

• Jul 14, 2012

• #3

try the word twice and thats what i suggest a gallon of petrol "burn it" then try another gallon to make sure its dead.
So to sum up you need to burn it twice and not "two times" by the way welcome

 

H

HOOK

New Member

• Jul 14, 2012

• #4

you can get away with burning it just once. butt it must be done right

 

time76

Well-Known Member

• Jul 14, 2012

• #5

use hand signals

 

Tronicus Maximus

New Member

• Jul 15, 2012

• #6

flasher unit.......check that.

Then id pull all indicator bulbs out and check there ain't a short on LHS or RHS circuit using a beep meter.

Failing that go here:eBay - one of the UK's largest shopping destinations and search for "discovery".......I'll leave the rest to your financial standing