Discodevon
Well-Known Member
Hello, I believe you will need a nato hitch and coupler to get to the 4t you want
Rougharse Racing
Well-Known Member
The Military 130 ambulances have a gross weight of over 3.5 tonnes, it could be worth finding out how they are upgraded.
Don't forget that many drivers can't drive vehicles over 3500kg, so you may reduce the value of the vehicle.
You would have to update the V5 with DVLA nd it would be in a new tax and MOT class.
Anything above 3500kg could be more trouble than it is worth.
Don't forget that many drivers can't drive vehicles over 3500kg, so you may reduce the value of the vehicle.
You would have to update the V5 with DVLA nd it would be in a new tax and MOT class.
Anything above 3500kg could be more trouble than it is worth.
Pappasmurf
Well-Known Member
The OP might not even be able to drive a vehicle over 3500kg.
dag019
Well-Known Member
I am fairly sure they are running the HD chassis as well as the relevant up-rated suspension. If this is the case that is not something you can easily retro fit. If your empty camper box has added 600kg I would suggest the camper box is to heavy especially if you have not kitted the inside yet. It may be worth reviewing the construction and looking at lighter materials for the structure. An empty 110 is about 1800kg once the rear tub is removed.
A quick google puts the military 130 ambulance at 3.7t laden weight so that is not a huge increase over standard.
Pappasmurf
Well-Known Member
A complete custom chassis, custom axles, custom, suspension, custom brakes, custom diffs, custom props, custom gearbox and probably a Cummins engine, with a defender cab on it.the question is how a landy can be upgraded to say 5 ton
or 10 ton looking at this one
what would be involved
An awful lot of paperwork and a full VOSA inspection (even worse than the kit-car ones) leading to a re-classification of the vehicle, would be my bet.
i should have asked .......
can 130 gvw be increased to 4 ton without fitting a 6x6 chassis
if yes what modifications would it need
why do i ask...3.5 fully loaded is not enough if i want to fit a cummings at a later date and still be within the 80% of max load recommended in the overland camper build
can 130 gvw be increased to 4 ton without fitting a 6x6 chassis
if yes what modifications would it need
why do i ask...3.5 fully loaded is not enough if i want to fit a cummings at a later date and still be within the 80% of max load recommended in the overland camper build
a 130 with just front seats screen on rolling chassis weighs 1740kg,subframe 120-150 kg,40mm lightweight insulated panels around 250kg,90 kg of box section ally frame,pop up roof lifters hydraulics around 30-50kg various other fabrications...it all adds up
what "lighter" materials did you use on your build
dag019
Well-Known Member
My point is the army ambulance max out at 3.7. The army are no known for spending lots of money on space age materials and are known do carry a lot of kit and running heavy. Ultimately a land rover is a small light vehicle and if using it as a camper appropriate compromise would need to made because of this. If you want a large camper body fully kitted with all the home comforts and a large heavy cummins engine similar to the picture you have posted I would suggest you use a unimog or similar as the base vehicle not a land rover. You are fundamentally trying to get it to achieve something it is not designed for and is not large enough for.
Pappasmurf
Well-Known Member
If an Army Ambulance is not big enough for you, then maybe get something else. A 101 Forward Control, for example.
https://www.landyzone.co.uk/land-rover/130-camper-build.348609/
built the shell bigger than an ambulance..... size is good its about weight
Pappasmurf
Well-Known Member
You may find that the land rover chassis is just not up to it regardless what you do. A custom built chassis, plus axles and props may be the only answer for the kind of weight your after.
thanks for that i think your right
