Iann

Active Member
well the idea was to get stuck and try out the newly fitted winch
we ended up proper stuck in the woods with a wet miss firing engine and no one about. all good fun :D
 

Attachments

  • Photo0388.jpg
    Photo0388.jpg
    359.4 KB · Views: 334
  • Photo0389.jpg
    Photo0389.jpg
    416.5 KB · Views: 288
  • Photo0386.jpg
    Photo0386.jpg
    243.7 KB · Views: 390
  • Photo0387.jpg
    Photo0387.jpg
    319.1 KB · Views: 358
that hole is what we had to winch into out of the hole we nose dived into and flooded the electrics. the first pull the engine was dead and the winch was under water
first day out with a winch. ace :D
 
that hole is what we had to winch into out of the hole we nose dived into and flooded the electrics. the first pull the engine was dead and the winch was under water
first day out with a winch. ace :D[/QUOT

Spray the inside of the dizzy cap in WD40, fit the cap in place then smother the dizzy cap, plug leads and where the plug leads fit over the plugs in grease.

i did all my series trucks this way and never had a problem inc having the bonnet of one under a foot of water at Weston Coyney with the engine running, snorkel fitted of course :D
 
You bin in the mud run at weston coyney then cornish. I sunk my disco in it and it was half way up my windscreen there.was very wet that day
 
that hole is what we had to winch into out of the hole we nose dived into and flooded the electrics. the first pull the engine was dead and the winch was under water
first day out with a winch. ace :D[/QUOT

Spray the inside of the dizzy cap in WD40, fit the cap in place then smother the dizzy cap, plug leads and where the plug leads fit over the plugs in grease.

i did all my series trucks this way and never had a problem inc having the bonnet of one under a foot of water at Weston Coyney with the engine running, snorkel fitted of course :D


like you say a good coat of WD or the like works wonders and its amazing how they still seem to run under water,
when ever i think ive wet the ignition an have a miss fire i find its a couple of plug leads have come off not a damp problem
No8 & no7 are close to the bulk head and keep coming off

Ive found my running problem as while under water my home made intake let some muck into the carb blocking a main jet so it was only running on one choke, it wasnt miss firing it just sounded like a strangled 4 cylinder
The other problem was the winch on full pull was using all the electric and not leaving enough for the motor :rolleyes:

All good fun though :D
 
Was it a good day? I've only been once before and that was a good few years ago but i'm hoping to head there on sunday if all goes to plan.
 
Was it a good day? I've only been once before and that was a good few years ago but i'm hoping to head there on sunday if all goes to plan.

if you look on there web site Home | Frickley 4x4 Offroad Centre they say that some work on the site has been done but there are alot of places that are still as rough as hell. in this weather the ground will be hard and the ruts deep making it a bone shaker ride
there was not many folk about for a tow when i went (another meat on somewhere ) but they now have two tractors to pull you out


have fun :D
 
if you look on there web site Home | Frickley 4x4 Offroad Centre they say that some work on the site has been done but there are alot of places that are still as rough as hell. in this weather the ground will be hard and the ruts deep making it a bone shaker ride
there was not many folk about for a tow when i went (another meat on somewhere ) but they now have two tractors to pull you out


have fun :D

Awesome, cheers. I'll be going with a couple of mates so hopefully a tow will be a phone away, lol.

Frickley a few years ago....


 

Similar threads