A duff sensor will fault the HDC/ABS/EAS systems....steering *maybe* not.....
As I posted in your ither thread, easy to get to, sod to get out sometimes.
Look at the wiring to the sensor and also the connection which is under a little 'box' mounted under the wheel arch....the wiring has been known to chafe through....but sensors are cheap and simple to replace, just one allen bolt and a bit of levering to get them out....penetrating fluid soaked overnight helps.
As I posted in your ither thread, easy to get to, sod to get out sometimes.
Look at the wiring to the sensor and also the connection which is under a little 'box' mounted under the wheel arch....the wiring has been known to chafe through....but sensors are cheap and simple to replace, just one allen bolt and a bit of levering to get them out....penetrating fluid soaked overnight helps.
Thanks mate for all your help if your ever local I buy you a pint
Is this the sensor https://www.ebay.co.uk/itm/Front-AB...rentrq:a60dabe91700a4d2523626b5ffe9dae8|iid:1
Is this the sensor https://www.ebay.co.uk/itm/Front-AB...rentrq:a60dabe91700a4d2523626b5ffe9dae8|iid:1
Dats der one...
robhew86
Well-Known Member
FYI Just to be aware, I've been looking at ABS sensors and there seems to be two different part numbers for the front ones depending on your year.
The difference I believe is in the plug connector colour, blue and green ones... Apparently they are NOT interchangeable.
HTH.
The difference I believe is in the plug connector colour, blue and green ones... Apparently they are NOT interchangeable.
HTH.
Oh poo, I have a 2002, is that blue or green
The same part number for 2002-2005 brings up either a blue or a green connection I think it could be just supplier specific, I do my 2002 (52) has blue connections as I had them out a few weeks ago.....but I honestly don't know of or think there is a difference.
robhew86
Well-Known Member
Reason this was bought to my attention is I had a dodgy wheel bearing on my 2005 SC, cut a long story short...(don't ask...) Ended up fitting a whole new used hub/knuckle/ bearing/sensor assembly from a 2002 TD6.
The original one from my '05 SC was green.....the TD6 one was blue..... Didn't think anything of it until it was all back together, however now I have it throwing up a ABS light fault along with all the other l warning lights associated..... Fault showing is the sensor.
So looking into the basics..... I read the green and blue are not interchangeable.
Leave it with me and once I've sorted it I shall let you all know the outcome (either a dodgy sensor from the TD6 or they are not interchangeable!)
The original one from my '05 SC was green.....the TD6 one was blue..... Didn't think anything of it until it was all back together, however now I have it throwing up a ABS light fault along with all the other l warning lights associated..... Fault showing is the sensor.
So looking into the basics..... I read the green and blue are not interchangeable.
Leave it with me and once I've sorted it I shall let you all know the outcome (either a dodgy sensor from the TD6 or they are not interchangeable!)
robhew86
Well-Known Member
robhew86
Well-Known Member
PAS playing up....in what way?? I'd be very surprised if a wheel ABS sensor would have anything to do with that....
Datatek
Well-Known Member
Variable assistance?
robhew86
Well-Known Member
Keith, don't think the early 322's had it did they??
