Hi Andy.There's a challenge !!![]()
We're all dopes till we've done a job once.Right!
I'm a dope))
BrownieHi Gary.
As you most likely know you will need to remove the air duct which is also attached to the EGR.
1![]()
couple of jubilee clips should see it being able to move enough.
2![]()
3![]()
Little engine cover.
4![]()
Remove the air filter cover.
5![]()
Then you can fit the PCV filter.
6![]()
7![]()
8![]()
Hi JD.The bolt in pic 4 a few or the other bolts are bolted to the cam cover on posts that have a tendancy to break and spew oil out. I've now left them out of mine after it broke and I glued the cam cover back together. I believe if the wrong bolt is used it can puncture the cam cover causing oil leak.