davesdisco
New Member
ouch pain full 
Matt Baxter
Active Member
must be all done then?
Dr_evil
Banned
Nooo just not been able to get anything done recently hurt my leg so I'm waiting til its better before I do anything more. But I did get further with it just not got any pics, only things that need doing are the end caps, bottom panels on the sides and the two supports on the central jacking point
wtf :rofl:
Vagrent
Yaaaar
Real men do need winches:lol:
Vagrent
Yaaaar
big si
Well-Known Member
gayer than Gay Gayington from poofsville?Dr evil, you're the biggest gay ever:boink::lol:
that's a bold statement, henceforth you shall be known as Major Bumsore
chunkymunky
New Member
He has vanished!!
As a youngster he has either;
1. Masterbated himself to death.
2. Been beaten to death by current girlfriend for too much time on land rover.
3. Its dr.evil so encased in plaster after speed related mud wipe out.
4. See number 1
As a youngster he has either;
1. Masterbated himself to death.
2. Been beaten to death by current girlfriend for too much time on land rover.
3. Its dr.evil so encased in plaster after speed related mud wipe out.
4. See number 1
Dr_evil
Banned
Sorry Paul, forgot to update haha and I've not really been on the site much over the last few weeks. Anyway……….
The weather up heres been rather **** for the last few weeks and I've been in Gloucester with the short one
Anyway as to progress, none has been made other than a quick lick of paint to stop it from rusting til I can grind and flap disk it down sunny on tuesday though so i'm going to get some templates for the bottom plates and sides made up tomorrow then its just the bullbars that need bending into shape. I'm a few pictures behind so I'll get that sorted when I measure the templates tomorrow, I've re-adjusted the angle of the sides so it looks a bit better but thats about it really.
Hoping to have it down soon so I can Hammerite it or get it powder-coated
I've been teaching Phoebe how to drive so number two and three could have been possible but not for the reasons given
Any progress on this?
looking forward to seeing it finished ..
The weather up heres been rather **** for the last few weeks and I've been in Gloucester with the short one
Anyway as to progress, none has been made other than a quick lick of paint to stop it from rusting til I can grind and flap disk it down
sunny on tuesday though so i'm going to get some templates for the bottom plates and sides made up tomorrow then its just the bullbars that need bending into shape. I'm a few pictures behind so I'll get that sorted when I measure the templates tomorrow, I've re-adjusted the angle of the sides so it looks a bit better but thats about it really.Hoping to have it down soon so I can Hammerite it or get it powder-coated
He has vanished!!
As a youngster he has either;
1. Masterbated himself to death.
2. Been beaten to death by current girlfriend for too much time on land rover.
3. Its dr.evil so encased in plaster after speed related mud wipe out.
4. See number 1
I've been teaching Phoebe how to drive
so number two and three could have been possible but not for the reasons given
chunkymunky
New Member
Jeez, in a field? Scary
Dr_evil
Banned
Jeez, in a field? Scary
Well a large driveway surrounded by grass, she did well for her first attempt driving though!
Even if a VW Passat isn't the greatest learners car!
Dr_evil
Banned
Bottom plates cut today and bottom supports, need to fabricate a central X support tomorrow just to strengthen it for jacking.
No welding though as I cba, picked up some snorkel sealant too and the plugs for the airbox so I'm ready to do that too as soon as the weathers good.
Bullbar will be bent up next week if I can get a day this week to weld the bottom and sides on
No welding though as I cba, picked up some snorkel sealant too and the plugs for the airbox so I'm ready to do that too as soon as the weathers good.
Bullbar will be bent up next week if I can get a day this week to weld the bottom and sides on
Dr_evil
Banned
Here we go, managed to grind down some of the welds (hate flux wire), put on the middle bottom plate plus sides and patch up a few areas. Side bottom plates weren't cut yet so only got half of what I wanted to do today done but hey ho, managed to pick up an adaptor for my snorkel pipe for free so not too bad.
so only got half of what I wanted to do today done but hey ho, managed to pick up an adaptor for my snorkel pipe for free so not too bad.
