shunter v8

Active Member

• Mar 31, 2019

• #1

I thought I had sorted my issues after a seized brake caliper then coolant loss was traced to a leaking radiator. My new problem is the ignition switch on the centre console works fine in all positions apart from the start position where nothing happens usually only the first start of the day, turn it off and on a couple of times and it starts. There is no solenoid click its silent when you turn it to the crank position, is this likely to be the ignition switch that's faulty and is there a fairly easy solution to fix it. Thanks.

 

Datatek

Well-Known Member

• Apr 2, 2019

• #2

If you do a search, I think you will find that ignition switch failure is a well known problem.

 

shunter v8

Active Member

• Apr 2, 2019

• #3

Thanks for that I will check it out, i am pretty sure it is the switch.

 

Saint.V8

Dyed-in-the-wool 100% RR Junkie

Full Member

• Apr 2, 2019

• #4

The switch and the ignition barrel are two seperate components - you'll only need the switch pack....don't get scammed to buy the whole sha-bang, you only need the switch pack.

 

shunter v8

Active Member

• Apr 4, 2019

• #5

That's a great help saint, thanks very much for that info.