awlb
Member
Hi everyone -
I'm wondering if it is possible to replace part #2 (circled, image 1) without removing the entire ignition cylinder assembly. Appears that one of the connections broke off and the two wires which were attached (image 2, inside green circle) are no longer attached to the switch where the connection has broken off (image 3, red arrow).
Since the connection broke, turn indicators and all engine-related warning lights and gauges stopped working. Starter DOES work, as do headlights, fog lights, hazard lights --- basically all the things that would work without your key being in the ignition.
Any way to replace this broken part without removing the entire assembly, drilling out the pins, etc.?
Thanks in advance, appreciate the input.
I'm wondering if it is possible to replace part #2 (circled, image 1) without removing the entire ignition cylinder assembly. Appears that one of the connections broke off and the two wires which were attached (image 2, inside green circle) are no longer attached to the switch where the connection has broken off (image 3, red arrow).
Since the connection broke, turn indicators and all engine-related warning lights and gauges stopped working. Starter DOES work, as do headlights, fog lights, hazard lights --- basically all the things that would work without your key being in the ignition.
Any way to replace this broken part without removing the entire assembly, drilling out the pins, etc.?
Thanks in advance, appreciate the input.