DanielGwalter
New Member
afternoon,
I want to wire a two button start setup for my defender 90 (disco tdi)
on the back of the ignition switch i have the following
above taken from another forum !! so hope is correct
i then have to 30amp switches. one is an on/off (two terminals) the other is a mom (two terminals)
based on the wires i have, can someone assist and tell me what goes where...
please ...
D
I want to wire a two button start setup for my defender 90 (disco tdi)
on the back of the ignition switch i have the following
- Red/Brown glowplug
- Brown main 12v feed from battery
- White ign controlled feed to rest of wiring loom
- White and Black 12v feed to fuel shutoff soleniod on FIP
- White and Red to starter soleniod & brake check relay & start relay
above taken from another forum !! so hope is correct
i then have to 30amp switches. one is an on/off (two terminals) the other is a mom (two terminals)
based on the wires i have, can someone assist and tell me what goes where...
please ...
D