Jonnyb1990
Well-Known Member
It increases slightly when warm, assuming its anything the original,
You can change the idle screw, but it should be painted over by LR when leaving the factory as theres generelly no need to alter it,
maybe ask Turner engineering what they think
You can change the idle screw, but it should be painted over by LR when leaving the factory as theres generelly no need to alter it,
maybe ask Turner engineering what they think
danspann
Member
Currently it's idling at 1200 rpm in gear....
Jonnyb1990
Well-Known Member
auto or manual ?
Auto has some computer input i think
Auto has some computer input i think
danspann
Member
Auto....but mine has no computer
mississippi
New Member
Need to sort mine too, had to fuel to max to suit the new turbo conversion and the idle screw is turned down and no longer touching the arm any ideas the arm the throttle cable fits to seams to be in two pieces and seams adjustable.
mississippi
New Member
Will try that in the morning rushed out after altering the screw and didn't have time to look further ,will be chuffed if it sorts it don't want to mess about with the relationship between the plates on the lincage ,though I could mark it up with a scribe I suppose.
