K

Kingly

Active Member

• Dec 22, 2015

• #1

I think bearings have gone on an idler. Before I can order a new part, I need to identify the name of the part. It is one of the pulleys the auxillary belt goes around. It has no AC or ACE and is the pulley furthest away from the tensioner and nearest to the air filter. Can anyone provide me with the name or part number?

 

jamesmartin

Well-Known Member

• Dec 22, 2015

• #2

err6658 for pulley or err6949 for whole assembly

 

Last edited: Dec 22, 2015

K

Kingly

Active Member

• Dec 22, 2015

• #3

Thanks, James. Is the pulley easy to remove, or would it be easier to buy the whole assembly?

 

jamesmartin

Well-Known Member

• Dec 22, 2015

• #4

should come off reasonably easy ,depends if bearing has damaged the spigot,but id get a belt too

 

K

Kingly

Active Member

• Dec 22, 2015

• #5

Can I just confirm. I have searched for err6493 and the idler pulley comes up. On some sites, it shows all pulleys and the arrows point to one of the other pulleys, which is near the cylinder head. Are the two pulleys the same?

 

jamesmartin

Well-Known Member

• Dec 22, 2015

• #6

my mistake err66568 is the one you want

 

K

Kingly

Active Member

• Dec 22, 2015

• #7

Thanks. I have just done a search for err66568 and nothing is founds. On the previous number you recommended with the assembly, the assembly looked to be the correct one.

 

jamesmartin

Well-Known Member

• Dec 22, 2015

• #8

try err6658 a typo previous

 

discodrivercumbria

Well-Known Member

• Dec 22, 2015

• #9

jamesmartin said:

try err6658 a typo previous

Click to expand...

put your glasses on!!! or to many late nights on here!!! lol

 

jamesmartin

Well-Known Member

• Dec 22, 2015

• #10

discodrivercumbria said:

put your glasses on!!! or to many late nights on here!!! lol

Click to expand...

they were on

 

K

Kingly

Active Member

• Dec 23, 2015

• #11

Thanks, James.

 

K

Kingly

Active Member

• Dec 23, 2015

• #12

New pulley due tomorrow. Tested the bolt and it undid very easily. Hopefully should be straight forward. What should I torque the bolt to?

 

jamesmartin

Well-Known Member

• Dec 23, 2015

• #13

id just nip it up with some loctite

 

K

Kingly

Active Member

• Dec 27, 2015

• #14

Job complete. Took minutes to do. Noise has now disappeared. Thanks for all advice.