M

markusGER

New Member
Hi there,

I just purchased my first Series 3 and just realised that it looks not standard. The VIN "
SALLBAAH1AA157034" states that it is a Series 3 4 Cyl. so it cant be a Stage 1, but it looks like it, except the grill. Can anyone here help me to identify this model?

Thanks!
 

Attachments

  • image1.jpeg
    image1.jpeg
    410.4 KB · Views: 211
markusGER said:
Hi there,

I just purchased my first Series 3 and just realised that it looks not standard. The VIN "
SALLBAAH1AA157034" states that it is a Series 3 4 Cyl. so it cant be a Stage 1, but it looks like it, except the grill. Can anyone here help me to identify this model?

Thanks!
Click to expand...

Looks like someone has put a Ninety bonnet on it, and moved the grille panel. Landrover bits are highly interchangeable, and many old vehicles have been modified by the addition of later parts.
 
Also agree. Reg number suggests 1982 so late S3. Looks good! Perhaps it had a V8 in which was subsequently removed?
 
Rubins4 said:
Also agree. Reg number suggests 1982 so late S3. Looks good! Perhaps it had a V8 in which was subsequently removed?
Click to expand...

That would be nice since AFAIK there were not many SWB fitted with V8 engine. I think it might just be the case as Turboman suggested. Someone fitted a 90s bonnet. I like the look.
 
Agree it looks like a 90 bonnet with the grill panel moved forward. You say its got a Disco box, is it auto? Has the engine been moved forward to keep the gear lever in the right place?
 
It's a 5 gear shifter. I don't know the details of the conversion. There is quite some space under the bonnet, I'll check tomorrow for signs that the grille has been moved.
 
rob1miles said:
Agree it looks like a 90 bonnet with the grill panel moved forward. You say its got a Disco box, is it auto? Has the engine been moved forward to keep the gear lever in the right place?
Click to expand...
it would have to be otherwise there would be no room for a rear prop,its short enough with a defender short lt77
 
I think I’m right in saying that the Stage 1 was never produced in SWB and the Series was never available with a V8. The V8 was fitted to SWB NAS models for export? It points to being a nicely done hybrid with 200 tai engine. Looks okay.
 
I think there were a few SWB stage 1 v8's but very low numbers. I'd love one but probably worth a fortune.
 
On Wikipedia: "The Stage 1 was normally available only in LWB 109-inch (2,800 mm) form but 24 examples were built with the SWB 88 in (2,235 mm) wheelbase"
 
We would love to see some under-bonnet shots. It seems to me as has already been mentioned that the engine must have been mounted well forward to allow for the long bell-housing of the Discovery transmission. From the outside it looks to have been well done.
 
John S said:
I think I’m right in saying that the Stage 1 was never produced in SWB and the Series was never available with a V8. The V8 was fitted to SWB NAS models for export? It points to being a nicely done hybrid with 200 tai engine. Looks okay.
Click to expand...
A Stage 1 is essentially a factory modified Series. And as another poster mentioned there were a few 88’s.

V8’s where also available in U.K. market Ninety and One Tens. Only phased out after the arrival of the Tdi engines. Apart from the 50th special edition.
 
Extreedoc said:
We would love to see some under-bonnet shots. It seems to me as has already been mentioned that the engine must have been mounted well forward to allow for the long bell-housing of the Discovery transmission. From the outside it looks to have been well done.
Click to expand...
It could have a Defender bellhousing. And the grill might have been moved to make more room for the rad and inter cooler.
 
Here are some pics. Can upload more if requested.
 

Attachments

  • IMG_9334.JPG
    IMG_9334.JPG
    366.1 KB · Views: 177
  • IMG_6211.JPG
    IMG_6211.JPG
    364.3 KB · Views: 133
  • IMG_6952.JPG
    IMG_6952.JPG
    312.5 KB · Views: 170
  • IMG_0892.JPG
    IMG_0892.JPG
    438.4 KB · Views: 164
  • IMG_0375.JPG
    IMG_0375.JPG
    314.9 KB · Views: 129
  • IMG_6403.JPG
    IMG_6403.JPG
    331.5 KB · Views: 146
Well, that doesn't look like a Disco gearbox. Can't really understand why they moved the grille panel.
 
You must log in or register to reply here.

Similar threads

T
Series 1 ID
Replies
4
Views
980
Bobsticle
Bobsticle
S
Freelander 2 cranks but wont start - intermittently
Replies
7
Views
2K
Freddie17
Freddie17
A
2006 L322 4.2 SC - Bluetooth / MOST query
2
Replies
27
Views
2K
kds
K
xDParis64
Freelander 1 Converting from wasted spark to distributor (or Visa Versa)
Replies
0
Views
394
xDParis64
xDParis64
D
Steve's Land Raft
4 5 6
Replies
104
Views
8K
Dauphproto
D