Stone56
Well-Known Member
Well you do deserve it,
Stone56
Well-Known Member
And wear a scarfOk, fair enough. Find out where mr rat has got the entrance to his gaff-hosepipe down hole-water on full- stand back with old cricket bat/mean ass dawg…oh and gaffer tape your trooser legs…trust me.
Forrest Gump
Well-Known Member
Valid piece of advice…saw a terrier give a rat the good news then flick it away and it landed on the back of the old gaffers neck between his donkey jacket and neck..he flipped oot
Stone56
Well-Known Member
Mate got a big one cornered it jumped right over his shoulder that's when we started wearing scarfs and gogglesValid piece of advice…saw a terrier give a rat the good news then flick it away and it landed on the back of the old gaffers neck between his donkey jacket and neck..he flipped oot
TBH you may not be far out!
Although its last but one owner was a welder.
Yer a poor welder but a superb grinder.
Bad earth or dampness in the leccy connectors.
Can you swap with another relay, it might be feeding it the wrong juice rate ?
Hippo
Lord Hippo
Yer telling peeps to use inhumane meffuds of killing animals, which is against our law in the uk. There's humane meffuds available. No excuse not to use them. Fings like the supply of glue traps are banned. Methods causing prolonged pain and distress are banned.
#ratslivesmatter
Hippo
Lord Hippo
Is this on one side of the car or both?
When yer gorra dim bulb it is likely to be a loss somewhere. As above a worn relay contact. Loose fuse. Try pulling it out the fuse to see iffit grips like the others. If the bulb moves about and its ok in other sockets then look in the socket fer damage or worn contacts.
Fanks Dips a Nippo.
Is both sides, I even switched left to right etc. Luckily it's still in warranty (just) so they're on to the garridge this mornin.
I dug into this and this is what it came up with.
Basically the only humane way to do it is to bash them over the head or body with something.
Any sort of humane trap is seen as cruel, and any sort of poison is a "last resort".
From UFAW:
"It is therefore recommended that live caught rats and mice are humanely killed, using a concussive blow to the head. The trapped rat will need to be transferred to a sack
before delivering the concussive blow to its head."So basically this means putting yourself in some danger even if you are totally tooled up and experienced with it all, as a trapped rat can wee on you and bite you unless you know what you are doing.
It doesn't mention shooting it in the head or elsewhere, but I guess that would be a pretty "concussive blow".
This is getting to be a topic that is animating some people, wish I hadn't brought it up, as I did, more or less just for laughs.
Can only sympathise. Recently I get painful knees from kneeling on them even on carpet. The only way to avoid it is to use one of those cushioned mats, which are a pain but there you go.Morning All.
A poor sleep due to a painful right knee (see: Crawling under cars in the street).
Nice Sunny start here.
Have a good day!
Age is not fun.
I take it you mean a long central cut followed by a piano hinge?!!!Mornin
Suns a shinin, birds a tweetin, grass a growin, what's not to like ?
Still no sign of bathroom fitter, man from council says fitter is ill
Might cut ma bonnet and hinge it today
Stay focused all
My fingers are all crossed for you!!!
We has gotted neebs coming over for dins tomoz so today W has gone out to do lots of errands and a hospicle visit, pre-op for her injections in her fingas.
So I am on dusting, polishing and vacuuming duties, plus hosing out the downstairs bog.
I will have to put a mask on for the cleaning as dust has gone back to making me sneeze! Huh!
That or Aunty Histamines!
Cooler today.
Have a nice on , folks!
So I am on dusting, polishing and vacuuming duties, plus hosing out the downstairs bog.
I will have to put a mask on for the cleaning as dust has gone back to making me sneeze! Huh!
That or Aunty Histamines!
Cooler today.
Have a nice on , folks!
Marked up for three piano hinges, only problem being the top vent on bonnet, there's a hole under it.I take it you mean a long central cut followed by a piano hinge?!!!
My fingers are all crossed for you!!!
Just plucking up the courage for the first cut
Attachments
Yikes, I can see exactly why the bonnet lump would be a problem.Marked up for three piano hinges, only problem being the top vent on bonnet, there's a hole under it.
Just plucking up the courage for the first cut
I have seen kit cars with a bonnet hinge on one side, but many also, like the one on my Marlin, which is a one piece you have to take off each time.
Can you not hinge it at the back somehow?
