Decided to cut me hair the morning, a routine I do every 3 months or so. Using the shears I bought during lockdown. Got about half way and the tool stopped cutting, at a very rough peaky blinder stage. Messed about with the tool a bit and managed to reach a rough (very) mohican stage before it packed up again. Bit more messing about and got it all down to the wood. Tool is a Braun, used to be a reliable brand? not any more, label says made in chi-na. :(. Looks like I'll have to find a better one.
 
Eye is lookering at wardrobes. Wot does yer fink of this one? Should eye put blocks of pine wood between the side legs to spread the weight on the floor?

Should be ok if the legs land on or near the joists under the floor boards (joist positions are where the floor board nails show). I've never found it necessary to put spreaders under furniture but do put them under a bath if on floor boards as the point loads are quite high.
 
Decided to cut me hair the morning, a routine I do every 3 months or so. Using the shears I bought during lockdown. Got about half way and the tool stopped cutting, at a very rough peaky blinder stage. Messed about with the tool a bit and managed to reach a rough (very) mohican stage before it packed up again. Bit more messing about and got it all down to the wood. Tool is a Braun, used to be a reliable brand? not any more, label says made in chi-na. :(. Looks like I'll have to find a better one.

Every 3 months for a hair cut id be like....

1729191986816.png
 

Similar threads