solvista

Member

• Mar 8, 2016

• #1

... I got number one and two out very easily, and replaced them even more easily. Number three, however, was solid. So, I gave it everything I had to loosen it off. Obviously too much.

Now it turns but isn't going anywhere.

Common problem? I can't seem to find another thread.

What to do now?

 

SpringDon

Well-Known Member

• Mar 8, 2016

• #2

You may find the thread is ok but the heater plug has sheared. I would probably try to pull the top part of the plug off and see what's left. Unfortunately, you may have to take the head off as any drilling or extracting may drop stuff in the hot spot thing.

 

solvista

Member

• Mar 8, 2016

• #3

SpringDon said:

You may find the thread is ok but the heater plug has sheared. I would probably try to pull the top part of the plug off and see what's left. Unfortunately, you may have to take the head off as any drilling or extracting may drop stuff in the hot spot thing.

Click to expand...

Thanks SD. Yeah, I've just been looking at some youtube vids. Looks messy. I think I'm gonna be out of my depth completely here, so, I'm going to have it towed to a relative who knows about this kind of stuff.

 

solvista

Member

• Mar 8, 2016

• #4

By the way. Is there any reason I shouldn't try to start it? I suppose it will be difficult with a knackered plug, but, should it start, would I be risking anything?

 

Flossie

Well-Known Member

• Mar 8, 2016

• #5

It'll be fine but be aware that it 'may' blow the stripped plug out so don't stand looking in the line of fire!

 

solvista

Member

• Mar 8, 2016

• #6

I'll be behind the wheel. My gf will be under the bonnet with instructions to "listen for strange noises"

 

boguing

Well-Known Member

Full Member

• Mar 9, 2016

• #7

Seriously - when they come out nobody wants to be in the way. When I had one go it took part of the wiring loom with it and I never did find either.

 

SpringDon

Well-Known Member

• Mar 9, 2016

• #8

Yeah but the op is obviously aware of the danger of injury as he has already stated that it will be his gf under the bonnet. Safety first.

 

samc88

Drivels spiritual representative

• Mar 10, 2016

• #9

if it has stripped the thread in the head you can helicoil it