stratie · May 29, 2010

The ragtop on my 109 is well past it's sell by date, so i was going to put a truck cab on it.....but my truck cab has gone walkies

So i spent an hour or so sticking a hard top and side's off an 88" on to the 109.
At first i kinda liked it, but now im not so sure :doh:
I need idea's.....anyone

MudHunter · May 29, 2010

you lost a truck cab? find it n stick it on.

stratie · May 29, 2010

MudHunter said:
you lost a truck cab? find it n stick it on.

It was sat down the side of the driveway for at least two years, then one day it went missing

If it wasn't for this poxey rain, i wouldn't bother with a roof, but you know what the british weather is like.

Bump · May 29, 2010

stratie said:
At first i kinda liked it, but now im not so sure :doh:
I need idea's.....anyone

:nopics:

jimbot90 · May 29, 2010

trim ya 88 top down,so yuv still got plenty a pick up space n a bit bigger cab.

rustyrhinos · May 29, 2010

I like it - infact I love the overall scruffy, well-used look.

benlandy · May 29, 2010

OY !!! i wanted the first rat look landy !!!

jimbot90 · May 29, 2010

benlandy said:
OY !!! i wanted the first rat look landy !!!

tuff beat ya to it!

blue beasty · May 29, 2010

wof you done about rear door?

jimbot90 · May 29, 2010

blue beasty said:
wof you done about rear door?

ali chequer plate full width bottom bulkhead and a series top tailgate at the top.

stratie · May 30, 2010

jimbot90 said:
trim ya 88 top down,so yuv still got plenty a pick up space n a bit bigger cab.

I like that, i like that alot

How did you go about chopping it down? I dont know where to start.
Any advice would be fanfrickintastic.
Cheers dude :beer2:

Smilemon · May 30, 2010

That looks pretty cool. Its like an extended cab pickup. Rover should have made one of those.

blue beasty · May 30, 2010

ooooooo...thats really got me thinking.....109 crewcab....mmmmm

Series71 · May 30, 2010

likes that I do

stratie · May 30, 2010

The only way i can see it being done (on my landie anyway) is to drill out the rivets that hold the back panel/windows/door and remove it in one lump, then cut off what i dont need of the roof and side's, then re-rivet the rear end back on.....sound's simples innit....but i have those (3) ridges that run from front to back, on the roof.
How the feck can i make a tidy job of it??

ratty · May 30, 2010

benlandy said:
OY !!! i wanted the first rat look landy !!!

Tough. All mine have been Ratty look landys.

Sirus · May 30, 2010

Series71 said:
likes that I do

FFS show him any pic of a landy on the road and he gets all gooey eyed

ratty · May 30, 2010

Sirus said:
FFS show him any pic of a landy on the road and he gets all gooey eyed

Only cos he knows any landy that aint his is more reliable.

Beast o Bodmin · May 30, 2010

i got 3/4 rag to with hoops to finish it if yers like 1350 quids new.unused.land rover original cause I'm desperate for cash.

jimbot90 · May 30, 2010

stratie said:
The only way i can see it being done (on my landie anyway) is to drill out the rivets that hold the back panel/windows/door and remove it in one lump, then cut off what i dont need of the roof and side's, then re-rivet the rear end back on.....sound's simples innit....but i have those (3) ridges that run from front to back, on the roof.
How the feck can i make a tidy job of it??

thats wot i did,then re rivited it all bak on.then trimmed it wi a jigsaw n bent it bak round.yul av t trim ya top runners a bit shorter then cut em down ont angle then ali weld'em.

New Member

Active Member

New Member

Well-Known Member

New Member

Well-Known Member

New Member

New Member

Leaks an prone to bits dropping off

New Member

New Member

Member

Leaks an prone to bits dropping off

Space man

New Member

I'm not special I'm limited edition

Your all Banned except me

I'm not special I'm limited edition

Banned

New Member

Similar threads