xpuser8334

xpuser8334

Active Member
Yes... I'm asking for P/N's again.
Anyone any idea where I can get a good pair of these?
it's the little plastic bit that fastens from the bumper to the alloy sump guard... as pictured.
I also need the clips / fasteners for them too.

Please - No Trolls as I find their unhelpful messages worthy of being removed from the forum!
Although, Banter - yes.... but blatantly obvious trolling - no!
Thanks.
Wayne
bumper-to-sump-guard.jpg
 
The little ears are actually part of the undertray and should not have been separated:


I doubt you'll find them separately!
 
I don't have them on my early undertray. You guys have even more bits to undo just to change the oil !
 
B34R said:
The little ears are actually part of the undertray and should not have been separated:


I doubt you'll find them separately!
Click to expand...
Yeah... I know they shouldnt have been separated...... yet another fracking thing to sort out..

GrumpyGel said:
I don't have them on my early undertray. You guys have even more bits to undo just to change the oil !
Click to expand...
I guess I will leave them off, unless i go to a breakers yard an "borrow" a pair! - yes.. the worse oil change ever - although the 59 plate RR Sport isn't fun to do either!
 
B34R said:
The little ears are actually part of the undertray and should not have been separated:


I doubt you'll find them separately!
Click to expand...
@B34R can I ask where you got the diagram from? I've been looking for an electronic parts manual for ages without much luck.
 
I wonder if those ears are unique to the TD4 or final facelift?

Mine was the more simple version, but I've ripped all of the plastic off it anyway just leaving the metal frame. The plastic was infuriating me while I was trying to diagnose what turned out to be head gasket failure.

Go and have a look at http://new.lrcat.com
 
@B34R - It is a late 53 plate - literally (according to LR) one of the very last "pre-facelift" models.
I'm going to leave the plastics off.... with the amount of work I'm doing it will be better.
New engine going in this weekend - but new IRD Cooler being fitted too.
Thanks for the Link.... it is VERY useful.
 
they are not actually part of the under tray as they are not fastened to it they are fastened to the body of the car and are fastened to it by three bolts and then the bottom part clips over the sump protector they were put on all freelanders from 1997 -2006/07 go to a scrap yard or look on ebay.
 
You must log in or register to reply here.

Similar threads

SpacePig
Help : Need Seat blet, but can't get the correct Part Number
2
Replies
26
Views
2K
Grit Valve
Grit Valve
Dr_evil
Series King Cab
61 62 63
Replies
1K
Views
126K
discomark10
discomark10