D

David g4yvm

Active Member

• Jul 31, 2023

• #1

Time to show utter ignorance...

In the attached photo, not mine, i have outlined a pulley. In my 110 the device that is behind that pulley is loose on the frame and needs tightning up - if i shake the pulley the whole device moves, the pulley is still securely fatsend to its own thing...whatever it is. Trouble is, im not sure whats behind it or how it fastens to the engine frame. I know how to loosen the belts and get them off but what awaits? Is it just secured with through bolts or am i looking for something else?

 

Attachments

• 
  Screenshot 2023-07-31 at 14.31.09.png

  2.6 MB · Views: 157

Scooby22

Well-Known Member

• Jul 31, 2023

• #2

What engine is it. You may get some help with more info.

 

meego

Well-Known Member

• Jul 31, 2023

• #3

David g4yvm said:

Time to show utter ignorance...

In the attached photo, not mine, i have outlined a pulley. In my 110 the device that is behind that pulley is loose on the frame and needs tightning up - if i shake the pulley the whole device moves, the pulley is still securely fatsend to its own thing...whatever it is. Trouble is, im not sure whats behind it or how it fastens to the engine frame. I know how to loosen the belts and get them off but what awaits? Is it just secured with through bolts or am i looking for something else?

Click to expand...

If you’re talking about what that pulley is driving, it will likely be your power steering pump

 

D

David g4yvm

Active Member

• Jul 31, 2023

• #4

Sorry, its a 200tdi.

Thanks Meego. I THOUGHT it was either PS pump or alternator. Is the pump fastened using simple through bolts, case the frame?

 

Scooby22

Well-Known Member

• Jul 31, 2023

• #5

Red line pointing to power steering pump, yellow line pointing to alternator.

 

Attachments

• 
  20230731_183107.jpg

  662.8 KB · Views: 124

D

David g4yvm

Active Member

• Jul 31, 2023

• #6

Thanks!

 

meego

Well-Known Member

• Jul 31, 2023

• #7

David g4yvm said:

Sorry, its a 200tdi.

Thanks Meego. I THOUGHT it was either PS pump or alternator. Is the pump fastened using simple through bolts, case the frame?

Click to expand...

The PAS pump will be mounted to that plate with the slots you can see. You use a 1/2 strong bar in the square hole you see to tension the belts. The PAS pump will have the fluid pipe attached to it.

 

tottot

Well-Known Member

• Jul 31, 2023

• #8

Looks like the power steering pump is loose on its mounting plate from what is said in the OP.

 

D

David g4yvm

Active Member

• Aug 1, 2023

• #9

Any pics of what the method of fastening is? Three bolts im guessing?

 

dag019

Well-Known Member

• Aug 2, 2023

• #10

tottot said:

Looks like the power steering pump is loose on its mounting plate from what is said in the OP.

Click to expand...

I would agree but need OP to confirm if the pulley and pump are loose in relation to the flat metal plate or if the whole plate is loose (less likely).
But for the op here is what makes up the pas pump and the flat plate for tensioning the belt. It looks like it is actually four bolts holding the pump in place on the flat plate. But to get to them you you probably have to remove the three bolt holding the pulley on.

As a side note if you do not already have one download a parts catalogue (quick google for the pdf) as it is very useful for thing like this where you want to know what is behind things and how it comes apart.

 

D

David g4yvm

Active Member

• Aug 5, 2023

• #11

Long delay, soory.

Thanks for all the fab help. The pully and pump are still together but loose from the plate on which they seem to have been mounted. The tensioned arm is still tight, so the two belts are also tight - but the pump assy is simply very loose. The mounting bolts may well have been lost.

 

D

David g4yvm

Active Member

• Aug 5, 2023

• #12

The explosion above seems to show that only two bolts, 3 and 4, actually hold the pump to the plate. Is that right?

 

D

David g4yvm

Active Member

• Aug 6, 2023

• #13

Right, sorted.

Thanks to your kind guidance I now know I need four off m6 x 20mm bolts, my steering pump having lost all four of them.

Thanks guys (and gals if there was one)

Bolts found, after a fashion, fitted, tightened and running again. Thanks all....off to salisbury plain now to exercise Old Red (the landrover...she's old...and red)

 

Last edited: Aug 6, 2023

dag019

Well-Known Member

• Aug 7, 2023

• #14

David g4yvm said:

The explosion above seems to show that only two bolts, 3 and 4, actually hold the pump to the plate. Is that right?

Click to expand...

It takes a little bit of learning how to read the parts diagram but as you discovered it is held to the placte by 4x bolt number 3. i would oncea gain advocate for finding and downloading youself a copy as I find the parts book invaluable for things like this.

David g4yvm said:

Bolts found, after a fashion, fitted, tightened and running again. Thanks all....off to salisbury plain now to exercise Old Red (the landrover...she's old...and red)

Click to expand...

Good to hear you are back up and running and good to hear you have chosen the correct colour as well, far better than everyone else blue or green ones!