neale

New Member
Hi all,
Picked my freelander up yesterday afternoon, its a 1999 1.8 xei 50th anaversery, 74000 mls really pleased. I,ve been having a play this morning & and found when i engage the hill decent the light don't come on, 0n the dash. I aint tryed it off road yet, but i'm hoping its something simple. All lights come on when i first turn on ignition. Can anyone help ??
Cheers Pete.:crazy_driver:
 
its a common trick - when selling duff hippos to remove the warning light bulbs in the dash. You might have been had. check the bulbs first. Good luck.

:welcome to Looneyzone. Hope yu got a thick skin.

Wheres Moor Hill, by the way?
 
Hi all,
Picked my freelander up yesterday afternoon, its a 1999 1.8 xei 50th anaversery, 74000 mls really pleased. I,ve been having a play this morning & and found when i engage the hill decent the light don't come on, 0n the dash. I aint tryed it off road yet, but i'm hoping its something simple. All lights come on when i first turn on ignition. Can anyone help ??
Cheers Pete.:crazy_driver:
Have you tried it in first gear or reverse - only operates in these gears.

Also could be a duff contact on the switch - on mine the wire had broken away from the terminal - a quick solder and all fixed for nowt!!

Regards,

Steve
 
its a common trick - when selling duff hippos to remove the warning light bulbs in the dash. You might have been had. check the bulbs first. Good luck.

:welcome to Looneyzone. Hope yu got a thick skin.

Wheres Moor Hill, by the way?
The bulbs ok, it lights up when i first turn key on, cheers
 
Have you tried it in first gear or reverse - only operates in these gears.

Also could be a duff contact on the switch - on mine the wire had broken away from the terminal - a quick solder and all fixed for nowt!!

Regards,

Steve
I'll check switch. Cheers
 
Pull the gatter up over the gear stick. My wire loom broke off so I had no HDC. Two minutes with a soldering iron and the job was done. Good luck.
 

Similar threads