Flossie
Well-Known Member
I read something similar, mixes up the wrong side motor or something, bit like the abs sensors.
Datatek
Well-Known Member
Worked on one of mine, on the other, it went to recirculate and then refused to move back.Worked on mine
Must be at/near the pollen filter/blower motor? I'm not sure
Flossie
Well-Known Member
Number 8 in the rave pic up there ^^^^^ then.
What's them things?
Could be
Potentiometers, the bits that fail in the motors. They tell the ecu where the flap is in its travel
How many do you have kermie. I could do with 2 please
Sometimes the little leg solder points on the pots can become cracked where they enter into the circuit board. Resoldering can sometimes cure this. They are quite fragile really but have lasted this long I suppose. 
One motor I bought second hand off the bay wouldn't work when fitted. The potentiometer wasn't even thereSometimes the little leg solder points on the pots can become cracked where they enter into the circuit board. Resoldering can sometimes cure this. They are quite fragile really but have lasted this long I suppose.
Barstools!!!!One motor I bought second hand off the bay wouldn't work when fitted. The potentiometer wasn't even there
I've posted 4 to @Flossie, kept a couple back 'just on case'. He said he'd send some on over.
Cheers
