S Supersticky New Member Nov 23, 2024 #1 How in the lord do I go about cleaning these injector bolt holes out? Attachments IMG_20241114_120342.jpg 289.7 KB · Views: 85 IMG_20241115_102849.jpg 274.1 KB · Views: 88 IMG_20241113_125427.jpg 534.3 KB · Views: 79
Landmark2 Well-Known Member Nov 23, 2024 #2 I'd block the hole and use brake cleaner around the area then something to carefully clean the hole out. Griff
I'd block the hole and use brake cleaner around the area then something to carefully clean the hole out. Griff
discool Well-Known Member Nov 23, 2024 #3 Purchase a rubber/plastic bung or bungs to suit if u have more holes, and with some degreaser and brush loosen it up and then use a hose or power washer. Just standard stuff
Purchase a rubber/plastic bung or bungs to suit if u have more holes, and with some degreaser and brush loosen it up and then use a hose or power washer. Just standard stuff
Dippypud Never Knowingly Understood Full Member Nov 23, 2024 #4 That's a lot of oil/diesel on that injector ...
