I’ll have to double check when I manage to get in the garage (couple of hours). But from memory that all looks right, the only thing different is pin 6 from plug A joins with pin 9 (plug A) the other side of the of pin 6 on the the new multi plug. I have not as yet connected the transducer either.
 
mystery said:
can you check to see connection correct on drawing pleaseView attachment 191073
Click to expand...
As I thought, all is as above, with the exception of the transducer and the two 12V cables, the only reason for that was because of what the instructions said (didn’t want to deviate).
image.jpg


The good news is, the bulbs now work... bad news is I may need stronger glasses!!
0FF3713E-F2A4-4498-870A-672C6E1C1067.jpeg


However still couldn’t get one of the LEDs to fit in to the speedo, so I’m contemplating leaving it now..... well, I’ll try this other supplier first and if they don’t fit, I’ll call it a day

As always, many thanks for your time and patience!
 
Another piece of fine work which I will be printing off and adding to the collection.

Many thanks, once again
 
basically it redirects the lighting current through two fused relays and protects your light stalk switch from damage /wear or short circuit currents that can pass through the switch should the headlights short due to water
the only current passing through the switch is to the relay coils
defender AND OTHERS LIGHTING RELAY MOD.png
 
mystery said:
basically it redirects the lighting current through two fused relays and protects your light stalk switch from damage /wear or short circuit currents that can pass through the switch should the headlights short due to water
the only current passing through the switch is to the relay coils View attachment 191317
Click to expand...
Ok that’s great, thanks for this, wouldn’t of had a clue if you didn’t mention it. I’ll add it to the todo list!
Just finishing off the rear at the moment, it’s all mounted and I’ve finished putting the cable in ducting and taped it all up for added protection. I think I may need your assistance though with the fog light though, if I may
 
Another invaluable piece of information, you should bring out a wiring diagram manual, everything you have done is 100% better than anything I came across!!

Thank you once again
 
You must log in or register to reply here.

Similar threads

D
TD5 fuel gauge not working
Replies
0
Views
290
Dandyservices
D
stoney424
What colour speedo drive gear should I be using?
Replies
3
Views
439
miktdish
miktdish
L
Speedo problem
Replies
6
Views
1K
miktdish
miktdish
J
Brake lights
Replies
4
Views
532
300bhp/ton
300bhp/ton
R
LED side lights not working
Replies
9
Views
745
RickyFreelander
R