green hornet. the picture you out up shwing the wing slightly cut out is the pic i tryed uploading. i can see how ya do that bit but im unsure on how to do the rest cos surely ya will have to move radiator forward aswell ?? i defo want to tackle it but need some more info first
 
duane1986 said:
green hornet. the picture you out up shwing the wing slightly cut out is the pic i tryed uploading. i can see how ya do that bit but im unsure on how to do the rest cos surely ya will have to move radiator forward aswell ?? i defo want to tackle it but need some more info first
Click to expand...

I don't want to be rude mate as I'm all for helping, but if you can't work it out its too much for you.

The slam panel and body mounts only need moving a few inches and the inner wings just get shortened with the wings cut to suit. The issues come when you have to fit a front winch and an electric fan into basically no space. Because you have moved the radiator back to the water pump.

I understand where you're coming from and when/if I bobtail mine I will do the front as well but tbh unless you are into serious off road work it isn't worth the hassles.

Do what we all do on this forum. Build it and post the pictures so well all then know how to do it.

Go on be a trailblazer
 
i will be starting to bobtail the rear in the next week or so and will tackle front at same time. i will be uploading pictures as it goes through the stages. i will tackle the front end and if for any reason it doesnt go to plan ill jus build a tubular front end with modified bonnet etc like my previous disco bobtail had
 
duane1986 said:
i will be starting to bobtail the rear in the next week or so and will tackle front at same time. i will be uploading pictures as it goes through the stages. i will tackle the front end and if for any reason it doesnt go to plan ill jus build a tubular front end with modified bonnet etc like my previous disco bobtail had
Click to expand...
pls pls pls don't do a bobtail and cover it in chequer plate like a lot of people do to hide a join.

no one can see the join on mine on the sides or roof,the only place u can see it is inside,the rear windows are the original glass cut to fit aswell,not chequer plate or plastic:)
 
i will be doing it properley mate, i will have the quarters welded then welds ground down and give it a skim of filler. i dont want they to be any tell tale signs from the outside.
 
duane1986 said:
i will be doing it properley mate, i will have the quarters welded then welds ground down and give it a skim of filler. i dont want they to be any tell tale signs from the outside.
Click to expand...
good man:D

it looks so much better when done properly

arches_zps1a9807c0.jpg
 
duane1986 said:
i will be doing it properley mate, i will have the quarters welded then welds ground down and give it a skim of filler. i dont want they to be any tell tale signs from the outside.
Click to expand...

Top man for doing it yourself. It's all too easy to farm it off to others but you just don't get the satisfaction do you?

I look forward to the pictures and the thread when you get cracking. Good luck
 
my mates done loads of bobtails, we will be doing it together but as for the filling and the fine detail i will be doing my self. im even wanting to tackle the paint job my self. i have uploaded a picture of a yellow one into my gallery but it wont let me post on here thats how im wanting my one to be like
 
You must log in or register to reply here.

Similar threads

J
Vibration over 50mph on gradual turn left
Replies
3
Views
254
j1ck
J
M
Disco 3 (LR3) D3 Air Suspension front air valve blocK
Replies
0
Views
320
Matt Hyde
M
kato Disco
Defender with discovery front axle - are the brake components the same?
Replies
11
Views
460
Hicap phill
H
S
Disco 1 Disco 1 Rust repair prep
2
Replies
20
Views
2K
sv_dOnut
S
M
Disco 1 v8
Replies
6
Views
713
Stanleysteamer
Stanleysteamer