D

duane1986

New Member
hi all i am new to landyzone. i have bought my self a k reg 200 tdi to bobtail. my mates done a few bobtails so thats the easy part how ever i want to also shorten the front end but i am unsure of how to do this. is they anyoneon here that can help me
 
Hunter92 said:
take the engine out and but a battery and motor there
Click to expand...

No point cos the wheels won't move back. you could just remove radiator and cut chassis back to the engine.

Tdi engines run cold anyway so as long as its not thrashed. :D

( WARNING TO ALL KEYBOARD THRASHERS This is not a serious post.)
 
You'll find the front of the disco very pliable. Just drive it in to a wall. Try and get it square on. 30mph should do it, but if that's too short, just go a little slower, or go even faster if you want to shorten it a lot.
 
tombardier said:
You'll find the front of the disco very pliable. Just drive it in to a wall. Try and get it square on. 30mph should do it, but if that's too short, just go a little slower, or go even faster if you want to shorten it a lot.
Click to expand...

Remember to undo the seat bolts before hand. Removing windscreen is optional. :D
 
take the engine out, and replace with a mini 1000cc, u can then lose at least foot and half off the nose
 
i might have confused a few people on here, when you bobtail the rear of a disco 1 ya can also bobtail the front which takes 4 inch out. you have to chop down the wings, inner wings bonnet etc but i am unsure of how to do it
 
duane1986 said:
i might have confused a few people on here, when you bobtail the rear of a disco 1 ya can also bobtail the front which takes 4 inch out. you have to chop down the wings, inner wings bonnet etc but i am unsure of how to do it
Click to expand...

Why? :confused:
 
do that and you loose all light mounts etc,if its not road legal then just cut till your hearts content..iv never seen a front bobtail disco thats road legal
 
iv seen one road legal at a 4x4 fair i went to. i can only see 1 picture on google of how its done. i know its a big task but i think they look good when they are done
 
 
has anyone ever seen it done or now how to do it, could do with some pictures to look at and see how its done in stages then i will tackle mine
 
I can't see your photo but here's how it looks and here's the it to make

5b5ffb82d6c6ac92216c911377ecc222.jpg


Here's the cut

ad4eeb4c6051036dde980d0c8821f917.jpg


If you can't work the rest out I wouldn't go near it as you'll lose yourself. You need to move the body mounts and whole front end assembly as one.

Lift the body two inches and you won't need it anyhow

Can't get much better than this

3a60d625d049dfb97cc4615c334a1dad.jpg
 
that looks awesome mate, iv got a 4 door one but i cant decide how to have the back of mine. its either gonna be like yours, or im gonna have a little lip at the back. iv looked on google for the past week or so and only came accross 1 picture and cant find anymore
 
duane1986 said:
that looks awesome mate, iv got a 4 door one but i cant decide how to have the back of mine. its either gonna be like yours, or im gonna have a little lip at the back. iv looked on google for the past week or so and only came accross 1 picture and cant find anymore
Click to expand...

If you're on about the rear bobtail, read the thread from GummyBear. We bob tailed his
 
You must log in or register to reply here.

Similar threads

M
Disco 3 (LR3) D3 Air Suspension front air valve blocK
Replies
0
Views
143
Matt Hyde
M
S
Disco 1 Disco 1 Rust repair prep
2
Replies
20
Views
1K
sv_dOnut
S
M
Disco 1 v8
Replies
6
Views
641
Stanleysteamer
Stanleysteamer
Landylady666
Front passenger door on Disco 4 not unlocking with key fob
2
Replies
33
Views
2K
gstuart
gstuart
T
Door key mother board
Replies
7
Views
548
Stanleysteamer
Stanleysteamer