twelsh37

twelsh37

Active Member
Hi All,

I've broken down in France on the way back to Calais (Figures).

I had a squeak, a rumble and then a Thud as the front prop separated from the transmission

Having had a look below the UK has gone completely.

I'm waiting to get towed off the motorway

I'd like to remove the front prop and then limp home on the rear prop.

I have a Halford 200 quid tool kit, an adjustable spanner and a few other tools. Will I be able to get the front prop off without having prop shaft nut spanners?

Help most gratefully received.
 
Just need 1 or 2 14mm spanners. You may be able to get an adjustable on one nut but you'll need a 14 for the other. They are 9/16 but will go on with a bit of force
 
Oooh Unlucky old chap,

depends if you can get a spanner that fits, you should have a 9/16 socket in that kit and you may find a 14mm spanner will do the job for you.

Cheers
 
Oh and keep your doors locked, otherwise you may find hidden extras on your return. LOL
 
666 george said:
Just need 1 or 2 14mm spanners. You may be able to get an adjustable on one nut but you'll need a 14 for the other. They are 9/16 but will go on with a bit of force
Click to expand...

Why not use the correct sized spanner? No force needed then.
 
I use the halfords set too. I use the 3/8 ratchet and extension bar with the 9/16 socket, then a 14mm on the nut.
To help gain access on the diff side, may help if you jack up a wheel, which will allow you to rotate the prop and get to all bolts/nuts easy with any of the combinations above. HTH
 
twelsh37 said:
Hi All,

I've broken down in France on the way back to Calais (Figures).

I had a squeak, a rumble and then a Thud as the front prop separated from the transmission

Having had a look below the UK has gone completely.

I'm waiting to get towed off the motorway

I'd like to remove the front prop and then limp home on the rear prop.

I have a Halford 200 quid tool kit, an adjustable spanner and a few other tools. Will I be able to get the front prop off without having prop shaft nut spanners?

Help most gratefully received.
Click to expand...

Get it on the flat, handbrake off extension bar with a 9/16's socket (14 will work but you risk ruining the nuts then you will be stuck) possibly a spanner too, but the bolts should all be counterheld.

Roll the landy so you can get clear access to a nut, take it off, roll it again to get that one at the point you can get access, for the diff end you want to do the bottom ones as the prop angles upwards and the gearbox the top ones as the prop angles downward.

Hope this helps.
 
Cheers for all your help guys. Ive now made it back to home in Blighty. So now to buy a new prop and bits. Prop spanners etc
 
You must log in or register to reply here.

Similar threads

Zorro587
Noise gone but prop shaft queries abound
Replies
14
Views
1K
Chris_68
C
JoeCoutz
Defender TD5 90 - Play in front Prop Shaft - DON'T WANT TO DRIVE!
Replies
6
Views
1K
lynall
L
ar1g3
P38A Tips for torquing prop shaft bolts?
Replies
16
Views
2K
romanrob
R
D
Defender 300tdi Loss of Drive . Help Needed !
Replies
19
Views
2K
dogdog1
D
awkwardbob
P38A Front prop shaft question
Replies
4
Views
1K
awkwardbob
awkwardbob