brookediamond
New Member
Keep Compresor Filters Clean
Check For Leeky Airbags, As They Will Burn Your Compresor Out After I While If You Dont Replace Leeking Parts.
Other Than That I Think You Have To Suck It And See.
Dont Fix What Aint Broke.
Check For Leeky Airbags, As They Will Burn Your Compresor Out After I While If You Dont Replace Leeking Parts.
Other Than That I Think You Have To Suck It And See.
Dont Fix What Aint Broke.
crossa
New Member
I would also like to know where the filters are as I did not know that there where any, I've so much to learn.
Boydonegood
New Member
Hi guys
The location of the only 2 filters i know of for the Air Suspention ( Doesnt mean there isnt more, as a more knowledgable member may be able to help you with )
As you open the bonnet,In the back Right Hand Corner is a "Shoe Box" sized Black plastic box with "EAS" embossed onit..
The front end of the box has 2 clips that unclip and the lid lifts off,in there is the Air Compressor (Pump)... (Long Black Cylinder)
On the front end is a Black plastic screw on 3" round by 2" long filter,,This is the input filter....
On the same "EAS" Black plastic box....On the back right hand side (Outside of the box) Is a 1" round x 3" long (white) screw in filter..This is the Output filter......
Hope this is some help
LTel
The location of the only 2 filters i know of for the Air Suspention ( Doesnt mean there isnt more, as a more knowledgable member may be able to help you with )
As you open the bonnet,In the back Right Hand Corner is a "Shoe Box" sized Black plastic box with "EAS" embossed onit..
The front end of the box has 2 clips that unclip and the lid lifts off,in there is the Air Compressor (Pump)... (Long Black Cylinder)
On the front end is a Black plastic screw on 3" round by 2" long filter,,This is the input filter....
On the same "EAS" Black plastic box....On the back right hand side (Outside of the box) Is a 1" round x 3" long (white) screw in filter..This is the Output filter......
Hope this is some help
LTel
Boydonegood
New Member
Hi again
Ok,,this isnt the best description,,but maybe a bit clearer...The picture (The way i have rotated it) Is what you will see inside the EAS Box once you remove the lid looking from the bonnet end..
The Input Filter is marked...
On the outside of the box in the area where it says "Connector" is a screw in Output Filter
LTel
Ok,,this isnt the best description,,but maybe a bit clearer...The picture (The way i have rotated it) Is what you will see inside the EAS Box once you remove the lid looking from the bonnet end..
The Input Filter is marked...
On the outside of the box in the area where it says "Connector" is a screw in Output Filter
LTel
