Brian S
Well-Known Member
I have removed my cylinder head and notice all the pistons can rock a tiny bit in the bores. I presume a minute bit is ok but how much is too much?
I took off the head due to high oil use and lots of smelly smoke after I got water in the engine.
All the pistons are level and there is no up or down play.
When the oil filler cap was removed with engine running there was a lot of smoke chugging out the top. Is this normal?
Can't see any obvious leaks from the old gasket although it has left behind a lot of the old gasket on the block. Again I presume this is nothing unusual.
I took off the head due to high oil use and lots of smelly smoke after I got water in the engine.
All the pistons are level and there is no up or down play.
When the oil filler cap was removed with engine running there was a lot of smoke chugging out the top. Is this normal?
Can't see any obvious leaks from the old gasket although it has left behind a lot of the old gasket on the block. Again I presume this is nothing unusual.