DanClarke said:

Hi folks, I have been bought a 'spensive dashcam with front & rear cameras for Xmas/Birthday.
Anyone know how easy/hard it is to get a cable routed through the headlining space from front to rear or vice-versa?
I am sure I can get a live-wire through the bulkhead OK and up the A-Pillar for power to it at the windscreen end.

Anyone else fitted a dashcam on a P38?

Click to expand...

Mark Piercy said:

A drill

Click to expand...

DanClarke said:

Hi folks, I have been bought a 'spensive dashcam with front & rear cameras for Xmas/Birthday.
Anyone know how easy/hard it is to get a cable routed through the headlining space from front to rear or vice-versa?
I am sure I can get a live-wire through the bulkhead OK and up the A-Pillar for power to it at the windscreen end.

Anyone else fitted a dashcam on a P38?

Click to expand...

pwood999 said:

Remove pillar trims on one side, and tuck the wires behind the headlining. Routing the wires through the tailgate upper or lower depends where you're mounting the camera. If the camera has long wires attached, you might need to start at the back & run them forward

I have one like this mounted through the number plate light housing. Gives a good view behind as well as the bumper.

View attachment 303878

Click to expand...

DanClarke said:

Hi folks, I have been bought a 'spensive dashcam with front & rear cameras for Xmas/Birthday.
Anyone know how easy/hard it is to get a cable routed through the headlining space from front to rear or vice-versa?
I am sure I can get a live-wire through the bulkhead OK and up the A-Pillar for power to it at the windscreen end.

Anyone else fitted a dashcam on a P38?

Click to expand...

Wazzajnr said:

Why run through headlining space?
I would run it under the carpet to the back then bring it up the rear posts.

Click to expand...