L

landlover rob

New Member
Hi everyone,new to the site.given time and help i,ll understand how to navigate this site. Meantime the title says it all. Took my new baby, 1989 defender 90 down the M,way for first time. 10 miles in and my wifes backside was getting the heated seat treatment. Not having them i discovered an emence amount of heat traveling from centre to passenger side under seating area. Oil&water ok! Any ideas guys?
 
been in diff lock wouldnt cause heat ,transfer boxes do get hot as they run thick ep90 and exhaust runs under that side ,you need to add some heat shielding under seat box
 
jamesmartin said:
been in diff lock wouldnt cause heat ,transfer boxes do get hot as they run thick ep90 and exhaust runs under that side ,you need to add some heat shielding under seat box
Click to expand...

well that just goes to prove you really don't know as much as you think you know pal

think you left out a ''not'' btw
 
jamesmartin said:
been in diff lock wouldnt cause heat ,transfer boxes do get hot as they run thick ep90 and exhaust runs under that side ,you need to add some heat shielding under seat box
Click to expand...

I guess you can tell from the comfort of your chair that there's the correct oil in the box, and that there's actually some oil in it ?

clever chap that you are
 
Sean said:
I guess you can tell from the comfort of your chair that there's the correct oil in the box, and that there's actually some oil in it ?

clever chap that you are
Click to expand...
at least ive enough mechanical knowlrdege to know difflocked may cause issuse with wind up but not heat in transfer box
 
landlover rob said:
Hi everyone,new to the site.given time and help i,ll understand how to navigate this site. Meantime the title says it all. Took my new baby, 1989 defender 90 down the M,way for first time. 10 miles in and my wifes backside was getting the heated seat treatment. Not having them i discovered an emence amount of heat traveling from centre to passenger side under seating area. Oil&water ok! Any ideas guys?
Click to expand...

:welcome2: As you can see we is a friendly bunch :doh::doh::doh:
 
jamesmartin said:
at least ive enough mechanical knowlrdege to know difflocked may cause issuse with wind up but not heat in transfer box
Click to expand...

I refer you to the response I made earlier, Pal

am not here to make friends, if me advise helps good, if it doesn't it's not cost the OP anything and helps narrow it down

shame you just wanted to pick holes

muppet
 
ffs guys, either help this noob or not but don't hijack his first post with your personal ****, if ya want to bicker open a new fred in anything goes or slag each other off in pm's coz noone else cares!

you're both behaving like spoilt children!
 
You must log in or register to reply here.

Similar threads

malcolm_durant
Freelander 1 How generic are the cabin wiring looms?
Replies
10
Views
1K
damian46
damian46
Blob
L322 Solved - C1A13-64 (AF) Pressure does not decrease when venting gallery
Replies
2
Views
3K
stuu
stuu
Intestinalworm
Disco 2 Head Gasket and Heater Core
Replies
11
Views
2K
Intestinalworm
Intestinalworm
D
K Series Guide/ Build Log
Replies
7
Views
2K
DanielG
D
andreas84
Looking for almost a "plug & play" conversion of the 2.5L petrol
Replies
1
Views
1K
Wildefalcon
W