should have a small core plug in it,corroded away looking at that casingThere's a small hole right at the top of my transfer box. Top, centre front as pictured.
I think it's probably always been there but previously filled/sealed.
Seems bizarre. Anyone got any ideas where it's come from? Could it be a poor casting? I'm losing quite a bit of oil through it. The oil pools on top of the transfer box then runs offs making a hell of a mess.
I'm just going to fill it with something like jb weld. A temp fix will be some blutack![]()
That does seem to imply there may be a core plug sloshing around inside there somewhereshould have a small core plug in it,corroded away looking at that casing
It'seems actually pretty clean. It may not look it in the area but it is. I gave it a good clean with brake cleaner and stuck some plumbers mate on it which seems to be holding well as a temp fix.
Nothing like fingering a bit of epoxy putty!!!I'd just give it a good clean and then finger a little bit of epoxy putty or similar into it not going to far to push it into the case.
I would also be tempted to look for the bit though. Big rectangular plate off the bottom and it will hopefully be in there.
Sounds like a fun Saturday night lolNothing like fingering a bit of epoxy putty!!!