123-eddy09

Active Member

• Jun 18, 2012

• #1

Evening all, was checking round the starter connections and noticed a 2" by 1" hole cut in the bell housing. Looked like it had been drilled in the 4 corners and the rest sawn out. it is a R380 in a 1996 300tdi. I don't think it's meant the be there but just to make sure thought I'd ask you guys. I can only think its been done to inspect the clutch.
Cheers.

 

-Defender110-

Well-Known Member

• Jun 19, 2012

• #2

...if it aint broke, dont fix it

 

tottot

Well-Known Member

• Jun 19, 2012

• #3

Wandering if its been done to grease clutch fork pivot?[dont go wading]

 

123-eddy09

Active Member

• Jun 19, 2012

• #4

That could make sense. Why do people always cut corners instead of doing a job properly. I've had the truck 2 1/2 years now and have only just noticed it. Oops.

 

tottot

Well-Known Member

• Jun 20, 2012

• #5

You may be able to pop rivet a patch over it to keep the crud out.

 

D

discomania

Well-Known Member

• Jun 21, 2012

• #6

The push rod will have fallen out of the fork or something and someone has bodged it.

I would weld a piece of aluminum over it, try and get some strength back - my concern is that it may reduce the intergrity of the bellhousing, it could then crack and you will end up with real issues.