Rick480

Member

• Nov 14, 2007

• #1

Im rebuilding a series 2, and have put on parabolic springs and the back end is far too high, the propshat is on its full stretch and wont turn, also the axle straps ar at least 6 inch of the holes!

Any suggestions?

 

yella

New Member

• Nov 14, 2007

• #2

bring em over here, ill swap yer fer a pair of good originals

 

S

slob

Well-Known Member

• Nov 14, 2007

• #3

i can sympatise with yer , there's nowt worst than yer^propshat being over stretched

 

E

Ed Foster

New Member

• Nov 14, 2007

• #4

Try the guys at the propshaft clinic Propshaft Clinic
They can make one to suit with extreme angle yolks to cope with your suspension lift or I think scorpion racing do some.

 

iannotts

New Member

• Nov 14, 2007

• #5

Are they the right springs???

 

C

Cabbie

Well-Known Member

Full Member

• Nov 15, 2007

• #6

Can't the Series 2 Club help. You'r using the club logo.

 

Sirus

Your all Banned except me

• Nov 15, 2007

• #7

I fawt they were spanner wan*ers....my mistake

 

Rick480

Member

• Nov 15, 2007

• #8

hey, i have loosened the springs, and put some weight over the back end which has made it a bit closer, alsodoes any1 know if the axle strap[s are ment to be differnet lengths?

 

Davec

New Member

• Nov 15, 2007

• #9

Yes, they are handed, presumably because the heaviest bit, the diff, isn't in the middle.

 

Rick480

Member

• Nov 15, 2007

• #10

cheers, so would the shortest go on the drivers side?

 

S

slob

Well-Known Member

• Nov 15, 2007

• #11

when you tighten the bolts up did you have it on the ground with an bit of weight in the back. also its an idea to drive them over a few bumps just settle every thing down. then leaving it sat on the deck tighten the ALL the bolts to spec torque

 

Rick480

Member

• Nov 15, 2007

• #12

its actually only a rolling chassis atm, new chassis new springs etc, so not alot of weight at all.

 

S

slob

Well-Known Member

• Nov 15, 2007

• #13

oh ffs MUM!

 

The Mad Hat Man

Well-Known Member

LZIR Despatch Agent

• Nov 15, 2007

• #14

yes?

oh MUM!